首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 KS B ISO 10644-2021
到馆提醒
收藏跟踪
购买正版
강제 평와셔와 스크루의 조립품 — 와셔 경도 200 HV 및 300 HV 带平垫圈的钢制螺钉和垫圈组件.垫圈硬度等级200HV和300HV
发布日期: 2021-06-30
该规格规定了螺钉的称呼为M2至M12,头部座面为平面,强度区分在10.9以下的普通米螺钉螺钉与硬度为HV200及HV300的平垫圈结合的要求条件。
이 규격은 나사의 호칭이 M2∼M12의 것으로서 머리부 자리면이 평면이고 강도 구분 10.9이하인 보통 미터 나사로 된 스크루와 경도가 HV200 및 HV300인 평와셔 결합에 대한 요구 조건에 대하여 규정한다.
分类信息
关联关系
研制信息
相似标准/计划/法规
现行
GB/T 97.4-2002
平垫圈 用于螺钉和垫圈组合件
Plain washers for screw and washer assemblies
2002-12-05
现行
KS B ISO 10644
평와셔와 스크루의 강제 조립품 — 와셔 경도 200 HV 및 300 HV
螺丝和垫圈组件由纯平垫圈制成 - 洗衣机硬度等级200 Hv和300 Hv
2015-04-10
现行
ISO 10644-2009
Screw and washer assemblies made of steel with plain washers — Washer hardness classes 200 HV and 300 HV
钢制螺钉和垫圈组件 带平垫圈——垫圈硬度等级200 HV和300 HV
2009-06-16
现行
JIS B 1130-2012
Screw and washer assemblies made of steel with plain washers -- Washer hardness classes 200 HV and 300 HV
带平垫圈的钢制螺钉和垫圈组件垫圈硬度等级200HV和300HV
2012-01-01
现行
BS EN ISO 10644-2009
Screw and washer assemblies made of steel with plain washers. Washer hardness classes 200 HV and 300 HV
带平垫圈的钢制螺钉和垫圈组件 垫圈硬度等级200 HV和300 HV
2009-07-31
现行
BS EN ISO 10510-2011
Tapping screw and washer assemblies with plain washers
带平垫圈的自攻螺钉和垫圈组件
2011-04-30
现行
KS B ISO 10510(2020 Confirm)
평와셔붙이 태핑 스크루 와셔 조립품
攻丝螺丝和垫圈组件与普通垫圈
2015-04-10
现行
JIS B 1129-2004
Tapping screw washer assemblies with plain washers
带平垫圈的自攻螺钉垫圈组件
2004-01-01
现行
GB/T 9074.18-2017
自攻螺钉和平垫圈组合件
Tapping screw and washer assemblies with plain washers
2017-07-12
现行
GOST R ISO 10510-2013
Винты самонарезающие с шайбами в сборке с плоскими шайбами
攻丝螺丝和垫圈组件与平垫圈
现行
GB/T 9074.1-2018
螺栓或螺钉和平垫圈组合件
Bolt or screw and washer assemblies with plain washers
2018-12-28
现行
ISO 10510-2011
Tapping screw and washer assemblies with plain washers
攻丝螺丝和垫圈组件与普通垫圈
2011-03-22
现行
UNE-EN ISO 10644-2010
Screw and washer assemblies made of steel with plain washers - Washer hardness classes 200 HV and 300 HV (ISO 10644:2009)
带平垫圈的钢制螺钉和垫圈组件.垫圈硬度等级200HV和300HV(ISO 10644-2009)
2010-02-24
现行
UNE-EN ISO 10510-2000
TAPPING SCREW AND WASHER ASSEMBLIES WITH PLAIN WASHERS (ISO 10510:1999)
带平垫圈的自攻螺钉和垫圈组件(ISO 10510-1999)
2000-05-31
现行
QJ 20040.1-2011
不锈钢螺钉垫圈组合件 第1部分:十字槽盘头螺钉、弹簧垫圈和平垫圈
Stainless steel screw and washer assemblies-Part 1:Cross recessed pan head screw,single coil spring lock washer and plain washer
2011-07-19
现行
QJ 20040.4-2011
不锈钢螺钉垫圈组合件 第4部分:六角头螺栓、弹簧垫圈和平垫圈
Stainless steel screw and washer assemblies-Part 4:Hexagon head bolt,single coil spring lock washer and plain washer
2011-07-19
现行
BS EN ISO 10669-1999
Plain washers for tapping screw and washer assemblies. Normal and large series. Product grade A
自攻螺钉和垫圈组件用平垫圈 普通和大型系列 产品等级为A级
1999-11-15
现行
BS EN ISO 10673-2009
Plain washers for screw and washer assemblies. Small, normal and large series. Product grade A
螺钉和垫圈组件用平垫圈 小型、普通和大型系列 产品等级为A级
2010-02-28
现行
JIS B 1257-2004
Plain washers for tapping screw and washer assemblies -- Normal and large series -- Product grade A
自攻螺钉和垫圈组件用平垫圈普通和大系列产品A级
2004-01-01
现行
KS B ISO 10669(2020 Confirm)
태핑 스크루 및 와셔 결합용 평와셔류 — 표준과 대형시리즈 — 제품등급 A
用于自攻螺钉和垫圈组件的普通垫圈 - 正常和大型系列 - 产品等级A
2015-04-10