Low-Voltage Fuses - Part 14: Supplemental Fuses (Tri-national standard, with UL 248-14, second edition, and with the first edition of NMX-J-009/248/14-2000-ANCE)
低压熔断器.第14部分:补充熔断器(三国标准 UL 248-14 第二版和第一版NMX-J-009/248/14-2000-ANCE)
Preface:This is the common UL, CSA, and ANCEStandard for Low-Voltage Fuses – Part 14: Supplemental Fuses. This is the second edition of UL 248-14, the second edition of CSA C22.2 No. 248.14-00 (superseding the first edition, published in 1994), and the first edition of NMX-J-009/248/14-2000-ANCE.This Standard has been developed in compliance with Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group.This Standard has been approved by the American National Standards Institute (ANSI) as an American National Standard.General NOTE – This Part is intended to be read together with theStandard for Low-Voltage Fuses — Part 1: General Requirements, hereafter referred to as Part 1. The numbering of the Clauses in this Part corresponds to like numbered Clauses in Part 1. The requirements of Part 1 apply unless modified by this Part. For Clauses not shown below, refer to theStandard for Low-Voltage Fuses – Part 1: General Requirements, NMX-J-009/248/14-2000-ANCE • CSA C22.2 No. 248.1 • UL 248-1.Scope:This Part applies to supplemental fuses rated 60 A or less and intended only for supplementary overcurrent protection where branch circuit or equivalent applications are not involved. DC ratings are optional.