现行
EN 13034:2005+A1:2009
到馆提醒
收藏跟踪
分享链接
购买正版
选择购买版本
本服务由中国标准服务网提供
更多
前往中国标准服务网获取更多购买信息
支持批量购买纸质版标准
Protective clothing against liquid chemicals - Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment)
液体化学品防护服 - 化学防护服的性能要求 对液体化学品(6型和PB型设备)提供有限的保护性能
发布日期:
2009-05-06
实施日期:
2009-05-06
本文件规定了限量使用和可再使用的有限性能化学防护服的最低要求。有限性能化学防护服用于在潜在的暴露于轻喷雾,液体气溶胶或低压,低体积飞溅的情况下使用,不需要完全的液体渗透屏障(在分子水平)。
本文件涵盖了化学防护服(6型)和部分身体防护(PB型[6]型)。
化学防护服(类型6)覆盖并保护至少树干和四肢,例如一件式工作服或两件套装,带或不带罩,靴子或靴套。本文档通过使用EN 468变体的减少全套喷雾试验规定了6型套装不同部件之间的连接的最低要求,如5.2所述。
类似有限性能的部分身体保护(PB型[6])仅覆盖和保护身体的特定部位,例如。大衣,围裙,袖子等。不应该对整套西装进行测试(5.2)
This document specifies the minimum requirements for limited use and re-useable limited performance chemical protective clothing. Limited performance chemical protective clothing is intended for use in cases of a potential exposure to a light spray, liquid aerosols or low pressure, low volume splashes, against which a complete liquid permeation barrier (at the molecular level) is not required.
This document covers both chemical protective suits (Type 6) and partial body protection (Type PB [6]).
Chemical protective suits (Type 6) cover and protect at least the trunk and the limbs, e.g. one-piece coveralls or two piece suits, with or without hood, boot-socks or boot-covers. This document specifies minimum requirements for the connections between different parts of Type 6 suits by the use of a reduced whole suit spray test using a variant of EN 468, as described in 5.2.
Partial body protection of similar limited performance (Type PB [6]) covers and protects only specific parts of the body, e.g. coats, aprons, sleeves etc. They should not be tested to the whole suit test (5.2).