现行

GB/T 12471-2009

产品几何技术规范（GPS） 木制件　极限与配合
Geometrical product specifications（GPS) - Wooden part - Limit and fit

2009-03-16

现行

GB/T 12360-2005

产品几何量技术规范（GPS） 圆锥配合
Geometrical Product Specifications(GPS) Cone fit

2005-05-16

现行

BS DD CEN ISO/TS 14253-4-2010

Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment-Background on functional limits and specification limits in decision rules
几何产品规范（GPS） 通过测量工件和测量设备进行检验

2010-06-30

现行

GB/T 18779.4-2020

产品几何技术规范（GPS） 工件与测量设备的测量检验 第4部分：判定规则中功能限与规范限的基础
Geometrical product specifications (GPS)—Inspection by measurement of workpieces and measuring equipment—Part 4: Background on functional limits and specification limits in decision rules

2020-12-14

现行

ISO/TS 14253-4-2010

Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 4: Background on functional limits and specification limits in decision rules
几何产品规范（GPS）——工件和测量设备的测量检验第4部分:判定规则中功能限制和规格限制的背景

2010-04-29

现行

KS B ISO 1938-1

제품의 형상 명세(GPS) —치수 계측 장비 — 제1부: 길이 사이즈 일반 한계 게이지
几何产品规格（gps） - 尺寸测量设备 - 第1部分:线性尺寸的极限量规

2020-11-10

现行

ISO 1938-1-2015

Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 1: Plain limit gauges of linear size
几何产品规格（GPS） - 尺寸测量设备 - 第1部分:线性尺寸的平面极限量规

2015-10-26

现行

BS EN ISO 286-1-2010

Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes-Basis of tolerances, deviations and fits
几何产品规范（GPS） 线性尺寸公差的ISO代码系统

2013-08-31

现行

GB/Z 24638-2009

产品几何技术规范（GPS） 线性和角度尺寸与公差标注+/-极限规范 台阶尺寸、距离、角度尺寸和半径
Geometrical product specifications (GPS) - Linear and angular dimensioning and tolerancing: +/- limit specifications - Step dimensions, distances, angular sizes and radii

2009-11-15

现行

KS B ISO 286-1(2021 Confirm)

제품의 형상 명세(GPS) — 선 치수의공차에 대한 ISO 코드 시스템 —제1부: 공차, 편차 및 끼워맞춤의 기본
产品几何技术规范（GPS）.线性尺寸公差的ISO代码系统.第1部分:公差、偏差和配合的基础

2016-11-30

现行

KS B ISO 286-1

제품의 형상 명세(GPS) — 선 치수의공차에 대한 ISO 코드 시스템 —제1부: 공차, 편차 및 끼워맞춤의 기본
几何产品规格（Gps） - 线性尺寸公差的Iso代码系统 - 第1部分:公差 偏差和适合度的基础

2016-11-30

现行

ISO 286-1-2010

Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes — Part 1: Basis of tolerances, deviations and fits
几何产品规范（GPS）——ISO线性尺寸公差代码系统第1部分:公差、偏差和配合的基础

2010-04-16

现行

GB/Z 24636.5-2010

产品几何技术规范（GPS） 统计公差 第5部分：装配批（孔、轴配合）的统计质量指标
Geometrical product specifications(GPS) - Statistical tolerance - Part 5: Statistical quality indices of an assembly lot (hole/shaft fits)

2011-01-10

现行

GB/T 1800.1-2020

产品几何技术规范（GPS） 线性尺寸公差ISO代号体系 第1部分：公差、偏差和配合的基础
Geometrical product specifications (GPS)—ISO code system for tolerances on linear sizes—Part 1: Basis of tolerances, deviations and fits

2020-04-28

现行

DIN 2245-2

Geometrical product specifications (GPS) - Limit plug gauges - Part 2: For holes over 40 mm up to 65 mm nominal diameter
产品几何技术规范（GPS）.极限塞规.第2部分:公称直径大于40mm至65mm的孔

2008-07-01

现行

BS EN ISO 286-2-2010

Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes-Tables of standard tolerance classes and limit deviations for holes and shafts
几何产品规范（GPS） 线性尺寸公差的ISO代码系统

2013-08-31

现行

DIN 2245-1

Geometrical product specifications (GPS) - Limit plug gauges - Part 1: For holes from 1 mm up to 40 mm nominal diameter
产品几何技术规范（GPS）.极限塞规.第1部分:公称直径为1mm至40mm的孔

2008-07-01

现行

KS B ISO 286-2

제품의 형상 명세(GPS) — 선 치수의 공차에 대한 ISO 코드 시스템 — 제2부:구멍과 축에 대한 기준 공차 등급 및 한계 편차표
几何产品规格（Gps） - 线性尺寸公差的Iso代码系统 - 第2部分:标准公差等级表和孔和极限的偏差

2020-12-31

现行

ISO 286-2-2010

Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes — Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
几何产品规范（GPS）——ISO线性尺寸公差代码系统第2部分:孔和轴的标准公差等级和极限偏差表

2010-06-07

现行

GB/T 1800.2-2020

产品几何技术规范（GPS） 线性尺寸公差ISO代号体系 第2部分：标准公差带代号和孔、轴的极限偏差表
Geometrical product specifications (GPS)—ISO code system for tolerances on linear sizes—Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts

2020-04-28