1.1 本试验方法包括测定灰分不超过0.5的焦油和沥青的焦化值 %, 根据试验方法确定 D2415 . 1.2 通过该试验方法得到的结焦值高于通过试验方法获得的值 D2416 .参见第节中的偏差声明 13 . 1.3 以国际单位制表示的数值应视为标准值。本标准不包括其他计量单位。 1.4 本标准并不旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前建立适当的安全、健康和环境实践，并确定监管限制的适用性。 1.5 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。 ===意义和用途====== 4.1 该试验方法可用于指示相对结焦倾向，并用于评估和表征焦油和沥青。试验方法也可作为确定装运或供应来源一致性的一个要素。

1.1 This test method covers the determination of the coking value of tar and pitch having an ash content not over 0.5 %, as determined by Test Method D2415 . 1.2 Coking values by this test method are higher than those obtained by Test Method D2416 . See the bias statement in Section 13 . 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 4.1 This test method is useful for indicating the relative coke-forming propensities and for evaluating and characterizing tars and pitches. The test method can also be used as one element in establishing the uniformity of shipments or sources of supply.