首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 UNE 53959:2002 IN
到馆提醒
收藏跟踪
购买正版
Plastics. Thermoplastics pipes and fittings for the transport of liquids under pressure. Calculation of head losses. 塑料 压力下液体运输用热塑性塑料管和配件 水头损失的计算
发布日期: 2002-07-29
分类信息
发布单位或类别: 西班牙-西班牙标准
关联关系
研制信息
相似标准/计划/法规
现行
BS 2782-11-METHOD 1121H-1996
Methods of testing plastics. Thermoplastics pipes, fittings and valves-Thermoplastics pipes for the transport of liquids under pressure. Calculation of head losses
塑料的试验方法 热塑性塑料管道、配件和阀门 压力下液体输送用热塑性塑料管 水头损失的计算
1996-08-15
现行
BS EN 14541-1-2022
Plastics pipes and fittings. Utilisation of thermoplastics recyclates-Vocabulary
塑料管和配件 热塑性塑料回收物的利用.词汇
2022-06-10
现行
AS/NZS 1462.6-2008
Methods of test for plastics pipes and fittings, Method 6: Thermoplastics pipes, fittings and assemblies for the transport of fluids under pressure - Resistance to internal pressure
塑料管和配件的试验方法 方法6:压力下流体运输用热塑性塑料管、配件和组件.耐内压性
2008-06-30
现行
UNE-EN 12061-1999
PLASTICS PIPING SYSTEMS. THERMOPLASTICS FITTINGS. TEST METHOD FOR IMPACT STRENGTH.
塑料管道系统 热塑性塑料配件 冲击强度的试验方法
1999-12-31
现行
UNE-EN 12256-1999
PLASTICS PIPING SYSTEMS - THERMOPLASTICS FITTINGS - TEST METHOD FOR MECHANICAL STRENGTH OR FLEXIBILITY OF FABRICATED FITTINGS
塑料管道系统.热塑性配件.装配配件的机械强度或柔韧性的试验方法
1999-07-28
现行
BS 2782-11-METHOD 1108A-1989
Methods of testing plastics. Thermoplastics pipes, fittings and valves-True impact rate (TIR) boundaries of pipes
塑料的试验方法 热塑性塑料管、配件和阀门
1989-09-29
现行
UNE 53994-2011
Plastics. Thermoplastic pipes and fittings with metallic reinforce for building and civil engineering subsoil drainage.
塑料 建筑和土木工程地下排水用金属加固热塑性塑料管和配件
2011-01-19
现行
BS 2782-11-METHOD 1109A-1989
Methods of testing plastics. Thermoplastics pipes, fittings and valves-Resistance to environmental stress cracking of polyethylene pipes and fittings for non-pressure applications
塑料的试验方法 热塑性塑料管、配件和阀门
1989-10-31
现行
GOST R ISO 580-2008
Трубопроводы из пластмасс. Детали соединительные литьевые из термопластов. Методы определения изменения внешнего вида после прогрева
塑料管道系统 注塑热塑性塑料配件 加热后配件外观变化的确定方法
现行
BS 2782-11-METHOD 1121C-1997
Methods of testing plastics. Thermoplastics pipes, fittings and valves-Thermoplastics pipes for the conveyance of fluids. Nominal outside diameters and nominal pressures. Inch-based series
塑料的试验方法 热塑性塑料管道、配件和阀门 流体输送用热塑性塑料管 标称外径和标称压力 基于英寸的系列
1997-06-15
现行
BS EN ISO 19892-2018
Plastics piping systems. Thermoplastics pipes and fittings for hot and cold water. Test method for the resistance of joints to pressure cycling
塑料管道系统 冷热水用热塑性塑料管及配件 接头耐压力循环的试验方法
2018-10-11
现行
BS ISO 19892-2011
Plastics piping systems. Thermoplastics pipes and fittings for hot and cold water. Test method for the resistance of joints to pressure cycling
塑料管道系统 冷热水用热塑性塑料管及配件 接头耐压力循环的试验方法
2011-11-30
现行
ISO 19892-2011
Plastics piping systems — Thermoplastics pipes and fittings for hot and cold water — Test method for the resistance of joints to pressure cycling
塑料管道系统——冷热水用热塑性塑料管和配件——接头耐压力循环的试验方法
2011-10-21
现行
GOST R ISO 19892-2021
Трубопроводы из пластмасс. Трубы и фитинги из термопластов для горячей и холодной воды. Метод испытания соединений на стойкость к циклическому изменению давления
塑料管道系统 冷热水用热塑性塑料管和配件 接头耐压力循环的试验方法
现行
AS/NZS 1462.29-2019
Methods of test for plastic pipes and fittings, Method 29: Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
塑料管道和配件的试验方法 方法29:塑料管道和管道系统.用外推法测定管形热塑性材料的长期静水压强度
2019-12-15
现行
BS EN ISO 580-2005
Plastics piping and ducting systems. Injection-moulded thermoplastics fittings. Methods for visually assessing the effects of heating
塑料管道系统 注塑热塑性塑料配件 目视评估加热效果的方法
2005-11-05
现行
ISO 580-2005
Plastics piping and ducting systems — Injection-moulded thermoplastics fittings — Methods for visually assessing the effects of heating
塑料管道系统——注塑热塑性塑料配件——目视评估加热效果的方法
2005-03-07
现行
BS EN ISO 8795-2001
Plastics piping systems for the transport of water intended for human consumption. Migration assessment. Determination of migration values of plastics pipes and fittings and their joints
人类生活用水输送用塑料管道系统 移民评估 塑料管道、管件及其接头迁移值的测定
2002-10-22
现行
KS M ISO 8795(2018 Confirm)
플라스틱 배관계-이행 평가-관, 이음관 및 연결구의 이행값 측정
人类生活用水输送用塑料管道系统迁移评估塑料管道和配件及其接头迁移值的测定
2008-10-28
现行
KS M ISO 8795(2023 Confirm)
플라스틱 배관계-이행 평가-관, 이음관 및 연결구의 이행값 측정
人类饮用水运输用塑料管道系统迁移评估塑料管道和管件及其接头迁移值的测定
2008-10-28