涡轮增压器密封环 第2部分：检验方法
Turbocharger seal rings—Part 2:Inspection measuring principles

2021-12-31

涡轮增压器 第2部分：试验方法
Turbochargers-Part 2: Test methods

2005-02-14

涡轮增压器 第2部分：试验方法
Turbochargers—Part 2：Test methods

2018-02-06

轻型机械密封 第2部分：试验方法
Light mechanical seals-Part 2: Test method

2018-04-30

环境试验 第2部分：试验方法 试验Q：密封
Environmental testing - Part 2：Test methods - Test Q: Sealing

2013-11-12

Testing methods for paint components -- Part 2: Component analysis in solvent soluble matter -- Section 2: Softening point (Ring and ball method)
涂料组分试验方法第2部分:溶剂可溶物组分分析第2节:软化点（环球法）

1999-01-01

无菌医疗器械包装试验方法　第2部分：软性屏障材料的密封强度
Test methods for sterile medical device package—Part 2:Seal strength of flexible battier materials

2010-12-27

EN 14989-2. Chimneys and air supply duct systems for room sealed appliances. Requirements and test methods. Part 2. Flue and air supply ducts for individual room sealed appliances
EN 14989-2 房间密封设备用烟囱和送风管道系统 要求和测试方法 第二部分 单个房间密封设备的烟道和供气管道

2004-09-07

Connections for Fluid Power and General Use--Ports and Stud Ends with ISO 261 Threads and O-Ring Sealing Part 2: Heavy-Duty (S Series) Stud Ends--Dimensions, Design, Test Methods, and Requirements
流体动力和通用连接件ISO 261螺纹和O形密封圈的端口和螺柱端第2部分:重型（S系列）螺柱端尺寸、设计、试验方法和要求

2007-12-21

Connections for Fluid Power and High Pressure Use - Ports, Stud Ends, and Plugs with ISO 261 Threads and O-Ring Sealing - Part 2: Stud End Requirements, Dimensions, Design, and Test Methods (Stabilized: Feb 2017)
流体动力和高压用连接件.带ISO 261螺纹和O形密封圈的端口、螺柱端和塞子.第2部分:螺柱端要求、尺寸、设计和试验方法（稳定:2017年2月）

2017-02-08

Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends (ISO 6149-2:2006)
液压传动和通用连接件.带ISO 261公制螺纹和O形密封圈的端口和螺柱端.第2部分:重型（S系列）螺柱端的尺寸、设计、试验方法和要求（ISO 6149-2-2006）；德文版EN ISO 6149-2:2007

2007-05-01

Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends (ISO 6149-2:2006)
液压传动和通用连接件.带ISO 261公制螺纹和O形密封圈的端口和螺柱端.第2部分:重型（S系列）螺柱端的尺寸、设计、试验方法和要求（ISO 6149-2-2006）

2008-10-08

Connections for hydraulic fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends
液压传动和通用连接件——带ISO 261公制螺纹和O形密封圈的端口和螺柱端第2部分:重型（S系列）螺柱端的尺寸、设计、试验方法和要求

2006-02-16

Specification for O-Ring Face Seal Connectors: Part 3 - Requirements, Dimensions, and Tests for Steel Unions, Bulkheads, Swivels, Braze Sleeves, Caps, and Connectors with SAE J1926-2 Inch Stud Ends
O形密封圈端面密封连接器规范:第3部分:钢活接头、隔板、旋转接头、钎焊套管、盖和带SAE J1926-2英寸螺柱端头的连接器的要求、尺寸和试验

2012-06-29

Specification for O-Ring Face Seal Connectors: Part 2 - Requirements, Dimensions, and Tests for Steel Unions, Bulkheads, Swivels, Braze Sleeves, Braze-on Tube Ends, Caps, and Connectors with ISO 6149-2 Metric Stud Ends and ISO 6162 4-Bolt Flange Heads
O形圈端面密封连接器规范:第2部分:钢活接头、舱壁、旋转接头、钎焊套管、管端钎焊、管帽和带有ISO 6149-2公制螺柱端和ISO 6162 4螺栓法兰头的连接器的要求、尺寸和试验

2015-04-30

Connections for Fluid Power and General Use--Ports and Stud Ends with ISO 261 Metric Threads and O-Ring Sealing, Part 3: Light-Duty (L Series) Stud Ends--Dimensions, Design, Test Methods, and Requirements
流体动力和通用连接件ISO 261公制螺纹和O形密封圈的端口和螺柱端 第3部分:轻型（L系列）螺柱端尺寸、设计、试验方法和要求

2007-12-21

Connections for fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs
用于流体动力和一般用途的连接 - ISO 261公制螺纹和O形密封圈的端口和螺柱端 - 第4部分:外部六角和内六角螺栓插头的尺寸 设计 测试方法和要求

2017-08-09

Connections for Fluid Power and High Pressure Use - Ports, Stud Ends, and Plugs with ISO 261 Threads and O-Ring Sealing - Part 3: Port Plug Requirements, Dimensions, Design, and Test Methods (Stabilized: Jan 2017)
流体动力和高压用连接件.带ISO 261螺纹和O形密封圈的端口、螺柱端和插头.第3部分:端口插头要求、尺寸、设计和试验方法（2017年1月）

2017-01-04

Connections for Fluid Power and General Use--Ports and Stud Ends with ISO 261 Threads and O-Ring Sealing--Part 4: Heavy-Duty (S Series) External Hex Port Plugs--Dimensions, Design, Test Methods, and Requirements
流体动力和通用连接件ISO 261螺纹和O形密封圈的端口和螺柱端第4部分:重型（S系列）外六角端口插头尺寸、设计、试验方法和要求

2007-12-21

Connections for hydraulic fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends
液压传动和通用连接件——带ISO 261公制螺纹和O形密封圈的端口和螺柱端第3部分:轻型（L系列）螺柱端的尺寸、设计、试验方法和要求

2006-02-16