BS PD IEC/TS 62600-102:2016波能转换器（WEC）需要设计为在不同温度下高效运行 位置。应使用系统方法评估WEC的功率性能 在第二个位置（以下简称位置2），基于 第一个位置（以下简称位置1）。被测WEC的相似程度（WEC 1） 以及位置1的海洋气象条件到位置2的次级WEC（WEC 2） 确定本技术规范的方法和适用性。IEC 62600是一项技术规范，本部分描述了所需的方法 以及确定位置2 WEC 2功率性能所需的条件， 可能在不同的规模和配置变化，以适应新的网站 条件，在所有情况下，基于位置1中WEC 1的测量功率性能。这 技术规范允许在位置1或位置2根据 有限/不完整的数据资料，只要附有经验证的数字 模型或物理模型以及相关不确定性的评估。另一个关键因素是 评估的透明度。本技术规范包括:位置1原始测量所需的数据要求规范 包括对相关不确定性的评估（如果基于有限/不完整的数据 除IEC TS 62600-100和IEC TS 62600-101中规定的材料外。对WEC允许变更的限制，以及 地方位置2所需的波浪数据，至少符合IEC中的要求 TS 62600-101。在位置2开发功率矩阵。验证位置2处的功率矩阵。评估位置2处衍生性能参数的不确定性。几何、运动学和机械特性允许功率性能转移的要求 动态相似性。 允许纳入额外经验模型数据的要求。允许纳入额外数值模型数据的要求。技术规范不包括以下项目:位置1处的原始数据测量（见IEC TS 62600-100）。环境问题。操作和维护。交叉引用:IEC TS 62600-1IEC TS 62600-100IEC TS 62600-101:2015IEC TS 62600-2购买时可用的所有现行修订版均包含在本文件的购买中。

BS PD IEC/TS 62600-102:2016 Wave Energy Converters (WEC) need to be designed to operate efficiently at different locations. Systematic methods should be used to evaluate the power performance of a WEC at a second location (hereinafter Location 2) based on power performance assessment at a first location (hereinafter Location 1). The degree of similarity of the measured WEC (WEC 1) and the metocean conditions at Location 1 to the secondary WEC (WEC 2) at Location 2 determine the methodology and the applicability of this technical specification.This part of IEC 62600, which is a Technical Specification, describes the required methods and the required conditions to determine the power performance of the WEC 2 in Location 2, possibly at a different scale and with configuration changes to accommodate the new site conditions, in all cases based on measured power performance of WEC 1 in Location 1. This technical specification allows for assessment at Location 1 or Location 2 based on limited/incomplete data material, as long as this is accompanied by a validated numerical model or physical model and assessment of the uncertainty involved. Another key element is transparency in the assessment.This technical specification includes:Specification of data requirements needed from the original measurements at Location 1 including an assessment of the uncertainty involved (if based on limited/incomplete data material) in addition to those specified in IEC TS 62600-100 and IEC TS 62600-101.Limitation on the changes that are allowed to the WEC and the specification of the location.Wave data required at Location 2, as a minimum the requirements found in IEC TS 62600-101.Development of the power matrix at Location 2.Validation of the power matrix at Location 2.Assessment of uncertainties in the derived performance parameters at Location 2.Requirements for the allowable power performance transfer by geometric, kinematic and dynamic similarity.Requirements for the allowable incorporation of additional empirical model data.Requirements for the allowable incorporation of additional numerical model data.The technical specification does not cover the following items:The original data measurement at Location 1 (see IEC TS 62600-100).Environmental concerns.Operation and maintenance.Cross References:IEC TS 62600-1IEC TS 62600-100IEC TS 62600-101:2015IEC TS 62600-2All current amendments available at time of purchase are included with the purchase of this document.