请注意:此版本的所有临时修订版将在您购买时提供。1.范围1。1本标准适用于额定电流高达800安培、交流或直流电压高达600伏的针式和套筒式插头、插座、电源插座和连接器，其中最多可包括八个先导触点。根据加拿大电气规范第一部分、国家电气规范（NEC）、ANSI/NFPA 70和墨西哥电气规范（NOM 001 SEDE），这些设备旨在通过分支电路供电，或直接连接到分支电路，使用铜导体，用于室内或室外非危险场所。 在加拿大，用于容纳铝导线的设备的端子也符合CSA C22。2 No.65.1.2本标准不适用于单导线针和套管装置。CSA C22涵盖单极锁定型可分离连接器。2 No.1691/UL 1691.1.3本标准不适用于:a）与UL 817、CSA C22所涵盖的软线或电缆一体成型的装置。2号21和NMX-J-195-ANCE；b） UL 498、CSA C22涵盖的通用和专用设备，如连接插头、插座、电源线连接器、插孔、电流抽头、扁铁和电器插头。 2号42，CSA C22。2号57，CSA C22。2个编号182.2、NMX-J-412-ANCE、NMX-J-412/2-1-ANCE、NMX-J-412/2-2-ANCE、NMX-J-412/2-3-ANCE、NMX-J-412/2-4-ANCE、NMX-J-412/2-5-ANCE和NMX-J-412/2-6-ANCE；c） 用于连接铜导线的单极和多极连接器，用于UL 1977和CSA C22所涵盖的电气设备内部和之间的数据、信号、控制和电源应用（如暴露）。2第182.3号；d） 用于UL 1203和CSA C22所涵盖的危险（分类）场所的装置。 2第159号；ande）UL 508和CSA C22涵盖的开关联锁等产品。2号14。

Please note: All interim revisions for this edition available at time of your purchase will be included.1 Scope1.1 This standard applies to pin and sleeve type plugs, receptacles, power inlets, and connectors, rated up to 800 amperes and up to 600 volts ac or dc, and which may include up to eight pilot contacts. These devices are intended to provide power from branch circuits, or are for direct connection to the branch circuit in accordance with the Canadian Electrical Code Part I, the National Electrical Code (NEC), ANSI/NFPA 70, and the Mexican Electrical Code, NOM 001 SEDE, using copper conductors, for use in either indoor or outdoor nonhazardous locations. In Canada, the terminals of a device intended to accommodate aluminum conductors also comply with CSA C22.2 No. 65.1.2 This standard does not apply to single conductor pin and sleeve devices. Single pole locking-type separable connectors are covered by CSA C22.2 No. 1691/UL 1691.1.3 This standard does not apply to:a) Devices molded integrally with flexible cord or cable that are covered by UL 817, CSA C22.2 No. 21, and NMX-J-195-ANCE;b) General and special use devices, such as attachment plugs, receptacles, cord connectors, inlets, current taps, flatiron and appliance plugs, that are covered by UL 498, CSA C22.2 No. 42, CSA C22.2 No. 57, CSA C22.2 No. 182.2, NMX-J-412-ANCE, NMX-J-412/2-1-ANCE, NMX-J-412/2-2-ANCE, NMX-J-412/2-3-ANCE, NMX-J-412/2-4-ANCE, NMX-J-412/2-5-ANCE, and NMX-J-412/2-6-ANCE;c) Single and multi-pole connectors intended for connection to copper conductors, for use in data, signal, control and power applications within and between electrical equipment, where exposed, that are covered by UL 1977 and CSA C22.2 No. 182.3;d) Devices intended for use in hazardous (Classified) locations that are covered by UL 1203 and CSA C22.2 No. 159; ande) Products such as switched interlocks that are covered by UL 508 and CSA C22.2 No. 14.