ISO 21069-2:2008-道路车辆——使用滚柱制动器测试仪在最大授权总质量超过3.5 t的车辆上测试制动系统第2部分:空气液压和纯液压制动系统 -国家数字标准馆

现行 ISO 21069-2:2008

到馆阅读

收藏跟踪

购买正版

Road vehicles — Test of braking systems on vehicles with a maximum authorized total mass of over 3,5 t using a roller brake tester — Part 2: Air over hydraulic and purely hydraulic braking systems 道路车辆——使用滚柱制动器测试仪在最大授权总质量超过3.5 t的车辆上测试制动系统第2部分:空气液压和纯液压制动系统

发布日期： 2008-04-17

                ISO 21069-2:20 08描述了在滚筒制动器测试中产生可比较的测量结果的程序，使得无论在哪里进行滚筒制动器测试，都可以可靠地评估行车制动系统的效率。
ISO 21069-2:20 08涵盖了以下项目:

符号和定义；
测试方法；
测试条件；
所需测试设备；
测试设备的准确性；
所需的数据记录和计算；
结果的介绍；
通过/失败的评估标准。

ISO 21069-2:2008 describes a procedure that generates comparable measurement results in roller brake testing, such that the efficiency of the service braking system can be assessed reliably wherever the roller brake tests are performed.
The following items are covered in ISO 21069-2:2008:
 symbols and definitions;
 test methods;
 test conditions;
 test equipment required;
 accuracy of test equipment;
 data recording and calculation needed;
 presentation of results;
 assessment criteria for pass/fail.

分类信息

发布单位或类别：国际组织-国际标准化组织

ICS分类： 43.040.40道路车辆装置 - 制动系统

关联关系

研制信息

归口单位： ISO/TC 22/SC 33

相似标准/计划/法规

BS ISO 21069-1-2004

Road vehicles. Test of braking systems on vehicles with a maximum authorized total mass of over 3,5 t using a roller brake tester-Pneumatic braking systems
公路车辆在最大授权总质量超过3.5 t的车辆上使用滚筒式制动器测试仪测试制动系统

KS R ISO 21069-1(2018 Confirm)

도로 차량 — 롤러 브레이크 시험기를 사용한 최대 허용 총 질량 3.5t 이상 차량의 제동 장치 시험 — 제1부: 공기식 브레이크 장치
道路车辆最大允许总质量超过3.5t的车辆上制动系统的试验使用滚筒制动试验第1部分:气压制动系统

KS R ISO 21069-1(2023 Confirm)

도로 차량 — 롤러 브레이크 시험기를 사용한 최대 허용 총 질량 3.5t 이상 차량의 제동 장치 시험 — 제1부: 공기식 브레이크 장치
道路车辆.使用滚筒制动试验对最大授权总质量超过3.5t的车辆制动系统的试验.第1部分:气动制动系统

ISO 21069-1-2004

Road vehicles — Test of braking systems on vehicles with a maximum authorized total mass of over 3,5 t using a roller brake tester — Part 1: Pneumatic braking systems
道路车辆——使用滚柱制动器测试仪对最大授权总质量超过3.5 t的车辆上的制动系统进行测试第1部分:气动制动系统

KS R ISO 12161(2018 Confirm)

도로 차량－전동 차량 및 피견인 차량의 내구 제동 장치－시험 절차
道路车辆机动车辆和牵引车辆的持久制动系统试验程序

KS R ISO 12161(2023 Confirm)

도로 차량－전동 차량 및 피견인 차량의 내구 제동 장치－시험 절차
道路车辆机动车辆和挂车的耐久制动系统试验程序

BS ISO 12161-2006

Road vehicles. Endurance braking systems of motor vehicles and towed vehicles. Test procedures
公路车辆机动车辆和牵引车辆的持久制动系统测试程序

Road vehicles — Endurance braking systems of motor vehicles and towed vehicles — Test procedures
道路车辆——机动车和牵引车的耐久制动系统——试验程序

BS ISO 21069-2-2008

Road vehicles. Test of braking systems on vehicles with a maximum authorized total mass of over 3,5 t using a roller brake tester-Air over hydraulic and purely hydraulic braking systems
公路车辆在最大授权总质量超过3.5 t的车辆上使用滚筒式制动器测试仪测试制动系统

GB/T 44126.2-2024

道路车辆最大允许总质量3.5t以上车辆制动系统滚筒制动试验台台架试验方法第2部分：气顶液和纯液压制动系统
Road vehicles—Test of braking systems on vehicles with a maximum authorized total mass of over 3.5t using a roller brake tester—Part 2:Air over hydraulic and purely hydraulic braking systems

KS R ISO 7634(2020 Confirm)

도로 차량－압축 공기식 제동 장치－시험 방법
道路车辆压缩空气制动系统试验程序

BS ISO 20918-2007

Road vehicles. Braking threshold pressures for heavy commercial vehicle combinations with fully pneumatic braking systems. Test with roller brake tester
公路车辆配有全气动制动系统的重型商用车组合的制动阈值压力使用滚筒制动测试仪进行测试

GB/T 44128-2024

道路车辆重型商用列车气压制动系统制动开始压力滚筒制动试验台测量方法
Road vehicles—Braking threshold pressures for heavy commercial vehicle combinations with fully pneumatic braking systems—Test with roller brake tester

Road vehicles — Braking threshold pressures for heavy commercial vehicle combinations with fully pneumatic braking systems — Test with roller brake tester
道路车辆——带全气动制动系统的重型商用车组合的制动临界压力——用滚筒制动试验机进行试验

SAE J786A_199812

Brake System Road Test Code - Truck, Bus, and Combination of Vehicles
制动系统道路测试代码-卡车、公共汽车和车辆组合

Road vehicles — Compressed air braking systems for towed vehicles including those with electronic braking control functions — Test procedures
道路车辆——牵引车辆的压缩空气制动系统包括具有电子制动控制功能的车辆——试验程序

UNE 26493-2-2001

Road vehicles. Thermoplastics tubing for air braking systems. Part 2: Mounting on vehicle and test methods.
公路车辆空气制动系统用热塑性塑料管第2部分:车辆安装和试验方法

Road vehicles — Hydraulic braking systems, including those with electronic control functions, for motor vehicles — Test procedures
道路车辆——机动车液压制动系统包括具有电子控制功能的系统——试验程序

BS 06/30127261 DC

ISO 20918. Road vehicles. Braking threshold pressures for heavy commercial vehicle combinations with fully pneumatic braking systems. Testing with rollerbrake tester
ISO 20918 公路车辆配有全气动制动系统的重型商用车组合的制动阈值压力用滚筒制动器测试仪进行测试

KS R ISO 4928(2024 Confirm)

도로 차량 — 비석유계 브레이크액을 사용하는 유압 브레이크 장치의 실린더용 합성 고무 컵과 실(최고 사용 온도 120 ℃)
道路车辆——使用非石油基液压制动液（最高工作温度120℃）的液压制动系统气缸的弹性杯和密封件

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

关于我们

查新颖性

查有效性

跟踪标准

比对标准

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统