BS 2782-1:METHOD 140E:1982-塑料的试验方法热性能-国家数字标准馆

现行 BS 2782-1:METHOD 140E:1982

到馆提醒

收藏跟踪

购买正版

Methods of testing plastics. Thermal properties-Flammability of a small, inclined test piece exposed to an alcohol flame (laboratory method) 塑料的试验方法热性能

发布日期： 1982-05-31

交叉引用:BS 2782:Introduction BS 3591工作健康和安全等法案1974甲基化酒精法规1983酒精酒关税法案1979取代了BS 2782:1970的方法508D。

Cross References:BS 2782:IntroductionBS 3591Health and Safety at Work etc. Act 1974Methylated Spirits Regulations 1983Alcoholic Liquors Duties Act 1979Replaces method 508D of BS 2782:1970.

分类信息

发布单位或类别：英国-英国标准学会

关联关系

研制信息

相似标准/计划/法规

BS 2782-1-METHOD 140D-1997

Methods of testing plastics. Thermal properties-Flammability of a test piece 550 mm x 35 mm of thin polyvinyl chloride sheeting (laboratory method)
塑料的试验方法热性能

BS 2782-1-METHOD 130A-1991

Methods of testing plastics. Thermal properties-Determination of the thermal stability of polyvinyl chloride by the Congo red method
塑料的试验方法热性能刚果红法测定聚氯乙烯的热稳定性

BS 2782-1-METHODS 134A AND 134B-1992

Methods of testing plastics. Thermal properties. Determination of the oxidation induction time of thermoplastics
塑料的试验方法热性能热塑性塑料氧化诱导时间的测定

BS 2782-1-METHOD 153A-1991

Methods of testing plastics. Thermal properties-Determination of stiffness in torsion of flexible materials (general method)
塑料的试验方法热性能柔性材料扭转刚度的测定（通用法）

BS 2782-1-METHOD 150D-1976

Methods of testing plastics. Thermal properties-Cold crack temperature of film and thin sheeting
塑料的试验方法热性能

BS 2782-1-METHOD 150B-1976

Methods of testing plastics. Thermal properties-Determination of cold flex temperature of flexible polyvinyl compound
塑料的试验方法热性能柔性聚乙烯化合物冷弯曲温度的测定

BS 2782-1-METHOD 153B-1991

Methods of testing plastics. Thermal properties-Determination of stiffness in torsion of flexible materials (method for vinyl chloride compounds)
塑料的试验方法热性能柔性材料扭转刚度的测定（氯乙烯化合物法）

BS 2782-1-METHOD 150C-1983

Methods of testing plastics. Thermal properties-Determination of low temperature extensibility of flexible polyvinyl chloride sheet
塑料的试验方法热性能

BS 2782-1-METHOD 151A-1984

Methods of testing plastics. Thermal properties-Determination of cold bend temperature of flexible polyvinyl chloride extrusion compound
塑料的试验方法热性能软质聚氯乙烯挤出料冷弯温度的测定

BS 2782-1-METHOD 131B-1983

Methods of testing plastics. Thermal properties-Determination of extensibility after heat ageing of flexible polyvinyl chloride sheet
塑料的试验方法热性能

Thermal Properties of Electrical Insulating Materials; Flammability under the Action Igniting Sources; Methods of Test; Identical with IEC 60707, Edition 1981 - GERMAN ONLY
电绝缘材料的热性能；火源作用下的可燃性；试验方法；与IEC 60707 1981版相同-仅德语版

Thermal Properties of Electrical Insulating Materials; Flammability under the Action Igniting Sources; Methods of Test; Identical with IEC 60707, Edition 1981 - GERMAN ONLY
电绝缘材料的热性能；火源作用下的可燃性；试验方法；与IEC 60707 1981版相同-仅德语版

BS 2782-1-METHOD 140A-1992

Methods of testing plastics. Thermal properties-Determination of the burning behaviour of horizontal and vertical specimens in contact with a small-flame ignition source
塑料的试验方法热性能与小型火焰点火源接触的水平和垂直试样燃烧特性的测定

BS 2782-1-METHODS 131C+AND 131D-1978

Methods of testing plastics. Thermal properties-Crushing strength after heating (heat resistance) of thermosetting moulding material. Crushing strength after heating (heat resistance) of thermosetting laminated sheet or mouldings
塑料的试验方法热性能

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统