1.1 本试验方法包括测定瓷砖或薄板形式弹性地板的电导或电阻，适用于医院、计算机室、洁净室、通道地板、弹药厂或任何其他与人员产生静电有关的环境。 1.2 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.3 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。 ====意义和用途====== 4.1 导电和静电耗散地板（静电控制地板）是将人和物体电连接在一起以防止静电积聚的方便方式。静态控制地板是根据受控电阻值指定的。地板表面在所有与地板接触的人员和设备之间提供了一条中等导电性的路径，以防止危险静电电荷的积聚。静电控制鞋需要与地板一起使用，以便地板与人员有效配合。 4.2 一些地板材料的电阻随年龄而变化。此类材料的地板应具有足够低或足够高的初始电阻，以允许电阻随年龄的增加或减少，而不超过产品规范中规定的限制。

1.1 This test method covers the determination of electrical conductance or resistance of resilient flooring either in tile or sheet form, for applications such as hospitals, computer rooms, clean rooms, access flooring, munition plants, or any other environment concerning personnel-generated static electricity. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 4.1 Conductive and static dissipative floors (static control flooring) serve as a convenient means of electrically connecting persons and objects together to prevent the accumulation of electrostatic charges. A static control floor is specified on the basis of controlled resistance values. The surface of the floor provides a path of moderate electrical conductivity between all persons and equipment making contact with the floor to prevent the accumulation of dangerous electrostatic charges. Static control footwear will need to be used in conjunction with the floor for the floor to perform effectively with personnel. 4.2 The resistance of some flooring materials change with age. Floors of such materials should have an initial resistance low enough or high enough to permit increase or decrease in resistance with age without exceeding the limits prescribed in the product specifications.