ISO 28927-6:2009规定了一种实验室方法，用于测量手持式电动夯手柄处的手传振动发射。这是一种型式试验程序，用于确定在规定试验条件下运行的机器夹紧区域的振动幅度。其目的是将结果用于比较同一类型机器的不同型号。 ISO 28927-6:2009适用于打夯机、回填打夯机、棘爪打夯机、砂打夯机和压模，通过气动或其他方式驱动，用于铸造厂、建筑工地等，并带有铸铁或橡胶制成的锤头或喷丸，用于铸造砂的打夯或冲压工作。

ISO 28927-6:2009 specifies a laboratory method for measuring hand-transmitted vibration emission at the handles of hand-held, power-driven rammers. It is a type-test procedure for establishing the magnitude of vibration in the gripping areas of a machine run under specified test conditions. It is intended that the results be used to compare different models of the same type of machine. ISO 28927-6:2009 is applicable to rammers, back-fill rammers, pawing rammers, sand rammers and stampers, driven pneumatically or by other means, intended for use in foundries, on building sites, etc., and with, for example, butts or peens made of cast iron or rubber, used for ramming of casting sand or in stamping work.