现行

SH/T 0721-2016

润滑脂摩擦磨损性能的测定　高频线性振动试验机（SRV）法

2016-12-05

现行

ASTM D7594-24e1

Standard Test Method for Determining Fretting Wear Resistance of Lubricating Greases Under High Hertzian Contact Pressures Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
用高频线性振荡（SRV）试验机测定润滑脂在高赫兹接触压力下耐微动磨损性的标准试验方法

2024-01-15

现行

ASTM D5707-23

Standard Test Method for Measuring Friction and Wear Properties of Lubricating Grease Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
用高频线性振荡（SRV）试验机测量润滑脂摩擦和磨损特性的标准试验方法

2023-11-01

现行

NB/SH/T 0944.2-2020

润滑剂抗磨损性能的测定 FE8滚动轴承磨损试验机法 第2部分：润滑脂
Standard test method for wear preventive characteristics of lubricant—FE8 rolling bearing method—Part 2:Lubricating grease

2020-10-23

现行

ASTM D1743-22

Standard Test Method for Determining Corrosion Preventive Properties of Lubricating Greases
测定润滑脂防腐性能的标准试验方法

2022-05-01

现行

UNE 51127-1985

STANDARD TEST METHOD FOR WEAR PREVENTIVE CHARACTERISTICS OF LUBRICATING GREASE. (FOUR-BALL METHOD)
润滑脂防磨损特性的标准试验方法 （四球法）

1985-06-15

现行

ASTM D2266-23

Standard Test Method for Wear Preventive Characteristics of Lubricating Grease (Four-Ball Method)
润滑脂防磨损特性的标准试验方法（四球法）

2023-07-01

现行

ASTM D5706-23

Standard Test Method for Determining Extreme Pressure Properties of Lubricating Greases Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
用高频线性振荡（SRV）试验机测定润滑脂极限压力特性的标准试验方法

2023-12-01

现行

ASTM D7420-23

Standard Test Method for Determining Tribomechanical Properties of Grease Lubricated Plastic Socket Suspension Joints Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
用高频线性振荡（SRV）试验机测定润滑脂润滑塑料承插悬挂接头的摩擦学性能的标准试验方法

2023-11-01

现行

T/CSG 006-2024

二硫化钼干膜润滑剂摩擦磨损性能试验方法 （试环-试块磨损试验）

2024-12-16

现行

ASTM D3527-23

Standard Test Method for Life Performance of Automotive Wheel Bearing Grease
汽车车轮轴承润滑脂寿命性能的标准试验方法

2023-03-01

现行

ASTM D3704-24

Standard Test Method for Wear Preventive Properties of Lubricating Greases Using the (Falex) Block on Ring Test Machine in Oscillating Motion
环形试验机上的（Falex）块在摆动运动中对润滑脂的磨损预防性能的标准试验方法

2024-10-01

现行

BS 2000-168-2003

Methods of test for petroleum and its products-Determination of rolling bearing performance of lubricating grease
石油及其产品的试验方法 滚动轴承润滑脂性能的测定

2005-11-18

现行

ASTM G223-23

Standard Test Method for Measuring Friction and Adhesive Wear Properties of Lubricated and Nonlubricated Materials Using the Twist Compression Test (TCT)
用扭转压缩试验（TCT）测量润滑和非润滑材料的摩擦和粘着磨损性能的标准试验方法

2023-06-01

现行

ASTM D5969-21

Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments
在稀释合成海水环境中润滑脂防腐性能的标准试验方法

2021-12-01

现行

ASTM D8317-23

Standard Test Method for Measuring Friction and Wear Properties of Greases Under Rolling Motion Using SRV Test Machine
使用SRV试验机测量润滑脂在滚动运动下的摩擦和磨损特性的标准试验方法

2023-11-01

现行

ASTM D6138-23a

Standard Test Method for Determination of Corrosion-Preventive Properties of Lubricating Greases Under Dynamic Wet Conditions (Emcor Test)
在动态潮湿条件下测定润滑脂防腐性能的标准试验方法（Emcor试验）

2023-07-01

现行

ASTM D7918-23

Standard Test Method for Measurement of Flow Properties and Evaluation of Wear, Contaminants, and Oxidative Properties of Lubricating Grease by Die Extrusion Method and Preparation
用模具挤压法和制备法测量润滑脂的流动特性和磨损、污染物和氧化特性评定的标准试验方法

2023-10-01

现行

ISO 14635-3-2023

Gears — FZG test procedures — Part 3: FZG test method A/2,8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases
齿轮.FZG试验程序.第3部分:半流体齿轮润滑脂的相对胶合承载能力和磨损特性的FZG试验方法A/2,8/50

2023-07-05

现行

ASTM D8316-20a

Standard Test Method for Measuring Friction and Wear Properties of Extreme Pressure (EP) Lubricating Oils with the Roller-Disk Geometry Using SRV Test Machine
用SRV试验机测量具有滚子盘几何形状的极压（EP）润滑油的摩擦和磨损性能的标准试验方法

2020-12-01