首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 GB/T 23711.1-2019
到馆阅读
收藏跟踪
购买正版
塑料衬里压力容器试验方法 第1部分:电火花试验 Test method for pressure vessels lined with plastics—Part 1:Spark testing
发布日期: 2019-12-10
实施日期: 2020-11-01
分类信息
关联关系
研制信息
相似标准/计划/法规
现行
GB/T 35974.5-2018
塑料及其衬里制压力容器 第5部分:塑料衬里制压力容器的制造、检查与检验
Plastics and plastic lining pressure vessels—Part 5: Fabrication, inspection and testing for pressure vessels with plastic lining
2018-02-06
现行
GB/T 23711.6-2019
塑料衬里压力容器试验方法 第6部分:耐压试验
Test method for pressure vessels lined with plastics—Part 6:Anti pressure testing
2019-12-10
现行
GB/T 23711.7-2019
塑料衬里压力容器试验方法 第7部分:泄漏试验
Test method for pressure vessels lined with plastics—Part 7:Leakage testing
2019-12-10
现行
GB/T 35974.4-2018
塑料及其衬里制压力容器 第4部分:塑料制压力容器的制造、检查与检验
Plastics and plastic lining pressure vessels—Part 4: Fabrication, inspection and testing for plastic pressure vessels
2018-02-06
现行
GB/T 23711.4-2019
塑料衬里压力容器试验方法 第4部分:耐负压检验
Test method for pressure vessels lined with plastics—Part 4:Negative pressure inspection
2019-12-10
现行
GB/T 23711.2-2019
塑料衬里压力容器试验方法 第2部分:耐低温试验
Test method for pressure vessels lined with plastics—Part 2:Low-temperature testing
2019-12-10
现行
GB/T 23711.8-2019
塑料衬里压力容器试验方法 第8部分:耐高电阻试验
Test method for pressure vessels lined with plastics—Part 8:High-resistance testing
2019-12-10
现行
GB/T 23711.3-2019
塑料衬里压力容器试验方法 第3部分:耐高温检验
Test method for pressure vessels lined with plastics—Part 3:High-temperature inspection
2019-12-10
现行
GB/T 23711.5-2019
塑料衬里压力容器试验方法 第5部分:冷热循环检验
Test method for pressure vessels lined with plastics—Part 5:Cold-hot cycling inspection
2019-12-10
现行
GB/T 7994.1-2014
搪玻璃设备试验方法 第1部分:水压试验
Test method of glass-lined equipments—Part 1: Hydraulic pressure test
2014-12-05
现行
WRC 299
Part 1: Engineering Aspects of CTOD Fracture Toughness Testing; Part 2: Three-Dimensional Elastic-Plastic Finite Element Analysis of Three-Point Bend Specimen; Part 3: Failure Prediction of Notched Pressure Vessels Using The CTOD Approach
第1部分:CTOD断裂韧性测试的工程方面;第二部分:三点弯曲试件的三维弹塑性有限元分析;第3部分:使用CTOD方法预测缺口压力容器的失效
现行
ISO 11296-4-2018/Amd 1-2021
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 4: Lining with cured-in-place pipes — Amendment 1: Updated definitions, marking requirements and procedure for alternative expression of flexural test results
弯曲试验结果替代表达的更新定义、标记要求和程序
2021-02-08
现行
UNE-EN 976-1-1998
UNDERGROUND TANKS OF GLASS-REINFORCED PLASTICS (GRP). HORIZONTAL CYLINDRICAL TANKS FOR THE NON-PRESSURE STORAGE OF LIQUID PETROLEUM BASED FUELS. PART 1: REQUIREMENTS AND TEST METHODS FOR SINGLE WALL TANKS.
玻璃钢(GRP)地下储罐 卧式圆柱形储罐 用于无压储存液态石油基燃料 第1部分:单壁储罐的要求和试验方法
1998-07-29
现行
UNE-EN 976-1-1999 ERRATUM
UNDERGROUND TANKS OF GLASS-REINFORCED PLASTICS (GRP). HORIZONTAL CYLINDRICAL TANKS FOR THE NON-PRESSURE STORAGE OF LIQUID PETROLEUM BASED FUELS. PART 1: REQUIREMENTS AND TEST METHODS FOR SINGLE WALL TANKS.
玻璃钢(GRP)地下储罐 卧式圆柱形储罐 用于无压储存液态石油基燃料 第1部分:单壁储罐的要求和试验方法
1999-06-14
现行
AFNOR NF EN 976-1
Underground Tanks of Glass-Reinforced Plastics (GRP). Horizontal Cylindrical Tanks for the Non-Pressure Storage of Liquid Petroleum Based Fuels. Part 1 : Requirements and Test Methods for Single Wall Tanks - FRENCH ONLY
玻璃钢(GRP)地下储罐 卧式圆柱形储罐 用于无压储存液态石油基燃料 第1部分:单壁储罐的要求和试验方法-仅限法国
1997-09-01
现行
DIN EN ISO 11296-4/A1-DRAFT
Draft Document - Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes - Amendment 1: Updated definitions, marking requirements and procedure for alternative expression of flexural test results (ISO 11296-4:2018/DAM 1:2020); German and English version EN ISO 11296-4:2018/prA1:2020
文件草案.地下无压排水和污水管网改造用塑料管道系统.第4部分:现场固化管道衬里.修改件1:弯曲试验结果替代表达的更新定义 标记要求和程序(ISO 11296-4:2018/D)
2020-08-01