本文件已被宣布为“稳定”，不再接受货币定期审查。用户负责验证参考资料和持续适用性或技术要求。新技术可能存在。本SAE推荐规程适用于使用机动车液压制动液的乘用车和轻型卡车制动系统上使用的阀门总成。本程序（SAE J 1118）和这些要求（SAE J 1137）是针对符合SAE J 1703和FMVSS 116（DOT 3）要求的制动液制定的； 但是，它可用于使用DOT 4或DOT 5制动液的阀门。这些要求适用于差压报警、计量暂停、旁通功能或比例阀或其任何组合。规定根据SAE J 1118测试的液压阀的最低性能、物理强度和耐久性要求。

This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist.This SAE Recommended Practice applies to valve assemblies that are used on passenger car and light truck braking systems utilizing motor vehicle hydraulic brake fluids. The procedure (SAE J 1118) and these requirements (SAE J 1137) were developed for brake fluids conforming to SAE J 1703 and FMVSS 116 (DOT 3) requirements; however, it may be utilized for valves which use DOT 4 or DOT 5 brake fluid. These requirements are applicable to differential warning, metering hold off, bypass function, or proportioning type valves or any combination thereof.To specify the minimum performance, physical strength, and durability requirements for hydraulic valves tested in accordance with SAE J 1118.