警告1-使用本文件的人员应熟悉正常的实验室实践。本文件并非旨在解决与其使用相关的所有安全问题（如有）。用户有责任建立适当的安全和健康实践，并确定任何其他限制的适用性。 警告2——本文件中规定的某些程序可能涉及使用或产生可能构成当地环境危害的物质，或产生废物。使用后，应参考有关安全处理和处置的适当文件。本文件规定了生胶以及硫化或未硫化橡胶化合物中氯和/或溴的测定方法。 这些方法适用于天然橡胶和以下合成橡胶:异戊二烯、苯乙烯-丁二烯、丁二烯、丁基、卤化丁基、丁腈、乙丙、氯丁二烯和环氧氯丙烷。交叉引用:ISO 1795ISO 4661-2ISO 3696ISO 19983购买本文件时可获得的所有现行修订均包含在购买本文件中。

WARNING 1 — Persons using this document should be familiar with normal laboratory practice. This document does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to determine the applicability of any other restrictions. WARNING 2 — Certain procedures specified in this document might involve the use or generation of substances, or the generation of waste, that could constitute a local environmental hazard. Reference should be made to appropriate documentation on safe handling and disposal after use.This document specifies methods for the determination of chlorine and/or bromine present in raw rubber as well as vulcanized or unvulcanized rubber compounds. The methods are applicable to natural rubbers and to the following synthetic rubbers: isoprene, styrene-butadiene, butadiene, butyl, halogenated butyl, nitrile, ethylene-propylene, chloroprene and epichlorohydrin.Cross References:ISO 1795ISO 4661-2ISO 3696ISO 19983All current amendments available at time of purchase are included with the purchase of this document.