首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 IEC 62196-1:2022 CMV
到馆提醒
收藏跟踪
购买正版
Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements 插头、插座、车辆连接器和车辆插孔.电动车辆的传导充电.第1部分:一般要求
发布日期: 2022-05-03
IEC 62196-1:20 22 CMV包含官方标准及其注释版本。注释版本为您提供了一种快速简单的方法来比较IEC 62196-1:20 22版4.0和之前的IEC 62196-1:20 14版3.0之间的所有更改。此外,还提供了IEC SC 23H专家的意见,以解释最相关变更的原因。 IEC 62196-1:20 22适用于EV插头、EV插座、车辆连接器、车辆入口,在本文中称为“附件”,以及用于电动汽车(EV)的电缆组件,该电缆组件旨在用于包含控制装置的导电充电系统,额定工作电压不超过: 690 V AC 50 Hz至60 Hz,额定电流不超过250 A; 额定电流不超过800 A的1 500 V DC。 这第四版取消并取代了2014年出版的第三版。本版构成技术修订版。 与上一版相比,此版本包括以下重大技术变更: 删除对通用交流和DC接口的引用; 触头材料和电镀的附加要求; 对温升测试进行变更,以包括额外的测量点; 对附件进行额外测试,以解决热应力和稳定性、机械磨损和滥用以及暴露于污染物的问题; 将直流充电的信息和要求重新定位至IEC 62196-3。
IEC 62196-1:2022 CMV contains both the official standard and its commented version. The commented version provides you with a quick and easy way to compare all the changes between IEC 62196-1:2022 edition 4.0 and the previous IEC 62196-1:2014 edition 3.0. Futhermore, comments from IEC SC 23H experts are provided to explain the reasons of the most relevant change.

IEC 62196-1:2022 is applicable to EV plugs, EV socket-outlets, vehicle connectors, vehicle inlets, herein referred to as "accessories", and to cable assemblies for electric vehicles (EV) intended for use in conductive charging systems which incorporate control means, with a rated operating voltage not exceeding:
  • 690 V AC 50 Hz to 60 Hz, at a rated current not exceeding 250 A;
  • 1 500 V DC at a rated current not exceeding 800 A.
This fourth edition cancels and replaces the third edition published in 2014. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
  1. deletion of references to universal AC and DC interfaces;
  2. additional requirements for contact materials and plating;
  3. changes to the temperature rise test to include additional points of measurement;
  4. additional tests for accessories to address thermal stresses and stability, mechanical wear and abuse, and exposure to contaminants;
  5. relocation of information and requirements for DC charging to IEC 62196-3.
分类信息
关联关系
研制信息
归口单位: TC 23/SC 23H
相似标准/计划/法规
现行
KS R IEC 62196-1
플러그, 소켓-아웃렛, 자동차 커넥터 및 자동차 인렛 — 전기자동차의 전도성 충전 — 제1부: 일반 요구사항
插头、插座、车辆连接器和车辆插座电动车辆的导电充电第1部分:一般要求
2024-01-05
现行
KS R IEC 62196-1(2020 Confirm)
플러그, 소켓-아웃렛, 자동차 커넥터 및 자동차 인렛 — 전기자동차의 전도성 충전 — 제1부: 일반 요구사항
插头 插座 车辆连接器和车辆入口 - 电动车辆的导电充电第1部分:一般要求
2015-05-07
现行
IEC 62196-1-2022
Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements
插头、插座、车辆连接器和车辆插孔.电动车辆的传导充电.第1部分:一般要求
2022-05-03
现行
GOST R IEC 62196-1-2013
Вилки, штепсельные розетки, соединители и вводы для транспортных средств. Кондуктивная зарядка для электромобилей. Часть 1. Общие требования
插头 插座 连接器和套管的车辆 传导充电的电动汽车 第1部分:通用要求
现行
BS PD IEC TS 62196-3-1-2020
Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles-Vehicle connector, vehicle inlet and cable assembly for DC charging intended to be used with a thermal management system
插头、插座、车辆连接器和车辆插孔 电动汽车的传导充电
2020-03-31
现行
KS R IEC TS 62196-3-1
플러그, 소켓-아웃렛, 자동차 커넥터 및 자동차 인렛 — 전기자동차의 전도성 충전 — 제3-1부: 열관리시스템과 같이 사용하기 위한 직류 충전용 자동차 커넥터, 자동차 인렛 및 케이블 어셈블리
插头 插座 车辆连接器和车辆插孔.电动车辆的传导充电.第3-1部分:与热管理系统一起使用的直流充电用车辆连接器 车辆插孔和电缆组件
2020-12-24
现行
IEC TS 62196-3-1-2020
Plugs,socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3-1: Vehicle connector, vehicle inlet and cable assembly for DC charging intended to be used with a thermal management system
插头、插座、车辆连接器和车辆插孔.电动汽车的传导充电.第3-1部分:与热管理系统一起使用的直流充电用车辆连接器、车辆插孔和电缆组件
2020-03-26
现行
IEC PAS 63472-2023
Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Dimensional compatibility description for configuration FF AC/DC contact-tube vehicle coupler
插头、插座、车辆连接器和车辆插孔 电动车辆的传导充电 FF AC/DC接触管车辆耦合器配置的尺寸兼容性描述
2023-05-04
现行
KS R IEC 62196-2
플러그, 소켓-아웃렛, 자동차 커넥터 및 자동차 인렛 — 전기자동차의 전도성 충전 — 제2부: 교류 핀과 접촉 튜브 부속품에 대한 치수 적합성 요구사항
插头、插座、车辆连接器和车辆插座电动车辆的导电充电第2部分:交流插针和接触管附件的尺寸兼容性要求
2024-01-05
现行
IEC 62196-2-2022
Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility requirements for AC pin and contact-tube accessories
插头、插座、车辆连接器和车辆插座.电动车辆的导电充电.第2部分:交流插脚和接触管附件的尺寸兼容性要求
2022-10-19
现行
KS R IEC 62196-2
플러그, 소켓-아웃렛, 자동차 커넥터 및 자동차 인렛 — 전기자동차의 전도성 충전 — 제2부: 교류 핀과 접촉 튜브 부속품에 대한 치수 적합성 및 상호 호환성 요구사항
插头 插座插座 车辆连接器和车辆入口 - 电动车辆的导电充电 - 第2部分:尺寸兼容性和互换性要求对于A.C.针和接触管配件
2019-10-25
现行
KS R IEC 62196-3
플러그, 소켓-아웃렛, 자동차 커넥터 및 자동차 인렛 — 전기자동차의 전도성 충전 — 제3부: 직류 및 교류/직류 핀과 접촉 튜브 자동차 커플러에 대한 치수 적합성 요구사항
插头、插座、车辆连接器和车辆插座电动车辆的导电充电第3部分:直流和交流/直流插针和接触管车辆耦合器的尺寸兼容性要求
2024-01-05
现行
IEC 62196-3-2022
Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3: Dimensional compatibility requirements for DC and AC/DC pin and contact-tube vehicle couplers
插头、插座、车辆连接器和车辆插座.电动车辆的导电充电.第3部分:直流和交流/直流插针和接触管车辆耦合器的尺寸兼容性要求
2022-10-19
现行
VDE 0623-5-1/A11-2013/DIN EN 62196-1/A11
Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements; German version EN 62196-1:2012/A11:2013
插头、插座、车辆连接器和车辆插孔.电动汽车的传导充电.第1部分:一般要求;德文版EN 62196-1:2012/A11:2013
2013-09-01
现行
UNE-EN 62196-1-2004
Plugs, socket-outlets, vehicle couplers and vehicle inlets - Conductive charging of electric vehicles -- Part 1: Charging of electric vehicles up to 250 A a.c. and 400 A d.c.
插头、插座、车辆耦合器和车辆插孔.电动汽车的传导充电.第1部分:交流250A和直流400A以下电动汽车的充电
2004-06-11
现行
KS R IEC 62196-3
플러그, 소켓-아웃렛, 자동차 커넥터 및 자동차 인렛?전기자동차의 전도성 충전?제3부: 직류 및 교류/직류 핀과 접촉 튜브 자동차 커플러에 대한 치수 적합성 및 상호 호환성 요구사항
插头 插座 车辆连接器和车辆入口 - 电动车辆的导电充电第3部分:直流的尺寸兼容性和互换性要求 和A.c./d.c 销和接触管车辆耦合器
2017-12-22
现行
KS R IEC 62196-3(2022 Confirm)
플러그, 소켓-아웃렛, 자동차 커넥터 및 자동차 인렛?전기자동차의 전도성 충전?제3부: 직류 및 교류/직류 핀과 접촉 튜브 자동차 커플러에 대한 치수 적합성 및 상호 호환성 요구사항
插头、插座、车辆连接器和车辆插孔.电动车辆的传导充电.第3部分:直流和交流/直流插针和接触管车辆耦合器的尺寸兼容性和互换性要求
2017-12-22
现行
DIN EN 62196-1/A1-DRAFT
Draft Document - Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements (IEC 23H/389A/CD:2017); Text in German and English
文件草案——插头、插座、车辆连接器和车辆插孔——电动汽车的传导充电——第1部分:一般要求(IEC 23H/389A/CD:2017);德语和英语文本
2018-06-01
现行
DIN EN 62196-1-100-DRAFT
Draft Document - Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements; German version EN 62196-1:2012/FprAA:2012
起草文件——插头、插座、车辆连接器和车辆插孔——电动汽车的传导充电——第1部分:一般要求;德文版EN 62196-1:2012/FprAA:2012
2012-07-01
现行
DIN EN 62196-1/AB-DRAFT
Draft Document - Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements; German version EN 62196-1:2012/FprAB:2013
起草文件——插头、插座、车辆连接器和车辆插孔——电动汽车的传导充电——第1部分:一般要求;德文版EN 62196-1:2012/FprAB:2013
2014-05-01