首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
被代替 JJF(烟草)4.4-2010
到馆提醒
收藏跟踪
购买正版
烟草及烟草制品 连续流动法测定常规化学成分测量不确定度评定指南 第4部分:氯 Tobacco and Tobacco Products—Evaluation of Uncertainty in Measurement for Routine Chemical Ingredients Using Continuous Flow Method—Part 4:Chloride
发布日期: 2010-12-27
实施日期: 2011-01-15
本规范所提供的不确定度评定程序,用于指导烟草及烟草制品连续流动法测定常规化学成分氯测量不确定度的评定
分类信息
关联关系
研制信息
相似标准/计划/法规
现行
JJF(烟草)4.5-2024
烟草及烟草制品 连续流动法测定常规化学成分测量不确定度评定指南 第5部分:钾
Tobacco and Tobacco Products—Evaluation of Uncertainty in Measurement for Routine Chemical Ingredients using Continuous Flow Method—Part 5:Potassium
2024-01-29
现行
JJF(烟草)4.4-2024
烟草及烟草制品 连续流动法测定常规化学成分测量不确定度评定指南 第4部分:氯
Tobacco and Tobacco Products—Evaluation of Uncertainty in Measurement for Routine Chemical Ingredients using Continuous Flow Method—Part 4:Chloride
2024-01-29
现行
YC/T 138-1998
烟草及烟草制品 感官评价方法
Tobacco and tobacco products—The sensory evaluation methods
1998-03-12
现行
JJF(烟草)4.3-2024
烟草及烟草制品 连续流动法测定常规化学成分测量不确定度评定指南 第3部分:总氮
Tobacco and Tobacco Products—Evaluation of Uncertainty in Measurement for Routine Chemical Ingredients using Continuous Flow Method—Part 3:Total Nitrogen
2024-01-29
现行
JJF(烟草)4.2-2024
烟草及烟草制品 连续流动法测定常规化学成分测量不确定度评定指南 第2部分:总植物碱
Tobacco and Tobacco Products—Evaluation of Uncertainty in Measurement for Routine Chemical Ingredients using Continuous Flow Method—Part 2:Total Alkaloids
2024-01-29
现行
JJF(烟草)4.1-2024
烟草及烟草制品 连续流动法测定常规化学成分测量不确定度评定指南 第1部分:水溶性糖
Tobacco and Tobacco Products—Evaluation of Uncertainty in Measurement for Routine Chemical Ingredients Using Continuous Flow Method—Part 1:Water Soluble Sugars
2024-01-29
现行
BS ISO 6565-2015
Tobacco and tobacco products. Draw resistance of cigarettes and pressure drop of filter rods. Standard conditions and measurement
烟草和烟草制品 香烟的吸阻和滤棒的压降 标准条件和测量
2015-12-31
现行
KS H ISO 6565
담배 및 제품담배-담배(궐련)의 흡인저항 및 필터로드의 압력강하-표준조건과 측정법
烟草和烟草制品卷烟的抗拔力和滤棒的压降标准条件和测量
2016-12-15
现行
KS H ISO 6565(2021 Confirm)
담배 및 제품담배-담배(궐련)의 흡인저항 및 필터로드의 압력강하-표준조건과 측정법
烟草和烟草制品.香烟的耐吸性和滤棒的压降.标准条件和测量
2016-12-15
现行
UNE-ISO 6565-2005
Tobacco and tobacco products. Draw resistance of cigarettes and pressure drop of filter rods. Standard conditions and measurement.
烟草和烟草制品 香烟的吸阻和滤棒的压降 标准条件和测量
2005-10-26
现行
ISO 6565-2015
Tobacco and tobacco products — Draw resistance of cigarettes and pressure drop of filter rods — Standard conditions and measurement
烟草和烟草制品 - 卷烟的阻力和过滤棒的压降 - 标准条件和测量
2015-12-07
现行
1979 No. 1489
The Tobacco Products (Amendment of Units of Measurement) Order 1979
1979年烟草制品(修订度量单位)令
现行
ISO/TS 7821-2005
Tobacco and tobacco products — Preparation and constitution of identical samples from the same lot for collaborative studies for the evaluation of test methods
烟草和烟草制品——从同一批次中制备和组成相同样品 用于试验方法评估的合作研究
2005-02-17
现行
KS H ISO TS 7821
담배 및 제품담배-시험방법의 평가를 위한 공동연구의 동일한 시료준비와 구성
烟草和烟草制品试验方法评价协作研究用同一批相同样品的制备和组成
2017-12-15
现行
KS H ISO TS 7821(2022 Confirm)
담배 및 제품담배-시험방법의 평가를 위한 공동연구의 동일한 시료준비와 구성
烟草和烟草制品.试验方法评估的合作研究用同一批次相同样品的制备和组成
2017-12-15
现行
YC/Z 385-2011
烟草及烟草制品 由同批样品中制备和组成测试方法评价的共同试验用均一样品
Tobacco and tobacco products—Preparation and constitution of identical samples from the same lot for collaborative studies for the evaluation of test methods
2011-03-25
现行
UNE 118028-2006 EX
Tobacco and tobacco products -- Preparation and constitution of identical samples from the same lot for collaborative studies for the evaluation of test methods.
烟草和烟草制品.试验方法评估用合作研究用同一批次相同样品的制备和组成
2006-07-19
现行
BS DD ISO/TS 15530-4-2008
Geometrical product specifications (GPS). Coordinate measuring machines (CMM). Technique for determining the uncertainty of measurement-Evaluating task-specific measurement uncertainty using simulation
几何产品规范(GPS) 坐标测量机(CMM) 测量不确定度的测定技术
2008-11-30
现行
GB/T 24635.4-2020
产品几何技术规范(GPS) 坐标测量机(CMM) 确定测量不确定度的技术 第4部分:应用仿真技术评估特定任务的测量不确定度
Geometrical product specifications (GPS)—Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement—Part 4: Evaluating task-specific measurement uncertainty using simulation
2020-12-14
现行
ISO/TS 15530-4-2008
Geometrical Product Specifications (GPS) — Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement — Part 4: Evaluating task-specific measurement uncertainty using simulation
几何产品规范(GPS)——坐标测量机(CMM):确定测量不确定度的技术第4部分:使用模拟评估特定任务的测量不确定度
2008-05-22