기계적 진동 — 선박의 진동 측정 — 제2부: 구조 진동의 측정
机械振动 - 船舶振动测量 - 第2部分:结构振动测量

2019-11-30

Вибрация. Измерения вибрации на судах. Часть 2. Измерения вибрации корпуса
机械振动测量船舶振动第2部分结构振动测量

Mechanical vibration — Measurement of vibration on ships — Part 2: Measurement of structural vibration
机械振动——shipsPart 2上的振动测量:结构振动测量

2008-10-29

机械振动 船舶振动测量 第2部分：结构振动测量
Mechanical vibration—Measurement of vibration on ships—Part 2: Measurement of structural vibration

2014-06-24

BS ISO 2954. Mechanical vibration of rotating and reciprocating machinery. Requirements for instruments for measuring vibration severity
BS ISO 2954 旋转和往复式机械的机械振动 测量振动严重性的仪器要求

2010-03-09

BS ISO 18312-2. Mechanical vibration and shock. Measurement of vibration power flow from machines into connected support structures. Part 2. Indirect method
BS ISO 18312-2 机械振动和冲击 测量从机器到连接支撑结构的振动功率流 第二部分 间接法

2011-01-20

Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration - Part 2: Practical guidance for measurement at the workplace. (ISO 5349-2:2001)
机械振动.人体接触手传振动的测量和评估.第2部分:工作场所测量的实用指南 （ISO 5349-2-2001）

2002-04-17

BS ISO 18437-5. Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials. Part 5. Poisson's ratio based on comparison between measurements and finite element analysis
BS ISO 18437-5 机械振动和冲击 粘弹性材料动态力学性能的表征 第五部分 基于测量和有限元分析比较的泊松比

2010-02-16

Mechanical vibration - Measurement and evaluation of machine vibration - Part 2: Land-based gas turbines, steam turbines and generators in excess of 40 MW, with fluid-film bearings and rated speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min (ISO 20816-2:2017)
机械振动.机器振动的测量和评估.第2部分:额定转速为1500r/min 1800r/min 3000r/min和3600r/min的超过40MW的陆上燃气轮机 蒸汽轮机和发电机（ISO 20816-2-2017）

2018-01-01