IEC 60730-2-22:20 14适用于IEC 60730-1中定义的家用和类似用途（包括供暖、空调和类似应用以及密封（密封和半密封型）电机压缩机）热电机保护器的部分评估。热电机保护器被认为是集成控制，因为其保护功能取决于电机中或电机上的正确安装和固定，并且只能与相关电机结合进行全面测试。这种依赖性由下式说明: -热电动机保护器准确且可靠地感测电动机绕组的热量的能力； -因此，解决由于电机过载条件引起的过温保护； -热电动机保护器准确可靠地感测由于电动机锁定而产生的电流的能力-转子条件； -因此，减少响应时间并且不受应用中组装点处的散热器和电动机的电磁场对热电动机保护器的开关行为的影响的不利影响； -特别地，影响触点之间的电弧方向，导致触点材料的不均匀磨损并最终导致操作失败。IEC 60335-2-34中给出了密封（密封和半密封型）电机压缩机和热电机保护器组合测试的要求。本标准适用于使用NTC或PTC热敏电阻的热电机保护器，其附加要求包含在附录J中。 关键词:热，电机保护器，集成控制

IEC 60730-2-22:2014 applies to the partial evaluation of thermal motor protectors as defined in IEC 60730-1 for household and similar use, including heating, air conditioning and similar applications as well as for sealed (hermetic and semi-hermetic type) motor-compressors. A thermal motor protector is considered an integrated control since its protective functionality is dependent on the correct mounting and fixing in or on a motor and which can only be fully tested in combination with the relevant motor. This dependency is illustrated by:
- the ability of the thermal motor protector to accurately and reliably sense the heat of the motor windings;
- thus, addressing the over-temperature protection due to motor overload conditions;
- the ability of the thermal motor protector to accurately and reliably sense the current due to motor locked-rotor conditions;
- thus, reducing the response time and not being adversely affected by heat-sink at the assembly spot in the application and the influence of the motor's electromagnetic field on the switch behaviour of the thermal motor protector;
- particularly, affecting the arc direction between the contacts resulting in uneven wear of the contact material and eventually leading to failure of operation. Requirements concerning the testing of the combination of sealed (hermetic and semi-hermetic type) motor-compressors and thermal motor protectors are given in IEC 60335-2-34. This standard applies to thermal motor protectors using NTC or PTC thermistors, additional requirements for which are contained in Annex J. Key words: Thermal, Motor protectors, Integrated control