现行

UNE-EN 12373-17-2002

ALUMINIUM AND ALUMINIUM ALLOYS - ANODIZING - PART 17: DETERMINATION OF ELECTRIC BREAKDOWN POTENTIAL.
铝和铝合金.阳极氧化.第17部分:击穿电位的测定

2002-04-16

现行

GB/T 8753.3-2005

铝及铝合金阳极氧化 氧化膜封孔质量的评定方法 第3部分:导纳法
Anodizing of aluminium and aluminium alloys-Assessment of quality of sealed anodic oxide coatings Part 3:Admittance test

2005-07-04

现行

UNE-EN 12373-3-1999

ALUMINIUM AND ALUMINIUM ALLOYS. ANODIZING. PART 3: DETERMINATION OF THICKNESS OF ANODIC OXIDATION COATINGS -NON-DESTRUCTIVE MEASUREMENT BY SPLIT-BEAM MICROSCOPE.
铝和铝合金 阳极氧化 第3部分:阳极氧化膜厚度的测定.分光显微镜无损测量

1999-05-31

现行

UNE-EN 12373-1-2002

Aluminium and aluminium alloys. Anodizing. Part 1: Method for specifying decorative and protective anodic oxidation coatings on aluminium.
铝和铝合金 阳极氧化 第1部分:铝上装饰性和保护性阳极氧化涂层的规定方法

2002-04-16

现行

UNE-EN 12373-14-2001

Aluminium and aluminium alloys. Anodizing. Part 14: Visual determination of image clarity of anodic oxidation coatings. Chart scale method.
铝和铝合金 阳极氧化 第14部分:阳极氧化涂层图像清晰度的目视测定 图表比例法

2001-02-28

现行

UNE-EN 12373-15-2001

Aluminium and aluminium alloys - Anodizing - Part 15: Assessment of resistance of anodic oxidation coatings to cracking by deformation.
铝和铝合金.阳极氧化.第15部分:阳极氧化涂层抗变形开裂性的评定

2001-02-28

现行

JIS H 8687-2013

Anodizing of aluminium and its alloys -- Determination of electric strength
铝及铝合金阳极氧化电强度的测定

2013-01-01

现行

DIN EN 12373-8

Aluminium and aluminium alloys - Anodizing - Part 8: Determination of the comparative fastness to ultra-violet light and heat of coloured anodic oxidation coatings
铝和铝合金.阳极氧化.第8部分:有色阳极氧化涂层耐紫外线光和热的比较牢度的测定

1999-02-01

现行

UNE-EN 12373-8-1999

ALUMINIUM AND ALUMINIUM ALLOYS. ANODIZING. PART 8: DETERMINATION OF THE COMPARATIVE FASTNESS TO ULTRA-VIOLET LIGHT AND HEAT OF COLOURED ANODIC OXIDATION COATINGS.
铝和铝合金 阳极氧化 第8部分:有色阳极氧化涂层耐紫外线光和热的比较牢度的测定

1999-12-31

现行

GB/T 22638.3-2016

铝箔试验方法 第3部分：粘附性的检测
Test methods for aluminium and aluminium alloy foils—Part 3：Determination of stickiness

2016-12-30

现行

DIN EN 12373-5

Aluminium and aluminium alloys - Anodizing - Part 5: Assessment of quality of sealed anodic oxidation coatings by measurement of admittance
铝和铝合金.阳极氧化.第5部分:通过导纳测量评估密封阳极氧化涂层的质量

1999-02-01

现行

UNE-EN 12373-5-1999

ALUMINIUM AND ALUMINIUM ALLOYS. ANODIZING. PART 5: ASSESSMENT OF QUALITY OF SEALED ANODIC OXIDATION COATINGS BY MEASUREMENT OF ADMITTANCE.
铝和铝合金 阳极氧化 第5部分:通过导纳测量评估密封阳极氧化涂层的质量

1999-06-30

现行

GB/T 8754-2022

铝及铝合金阳极氧化膜及有机聚合物膜 绝缘性的测定
Anodic oxidation coatings and organic polymer coatings on aluminium and aluminium alloys—Determination of electrical insulation

2022-03-09

现行

DIN EN 12373-2

Aluminium and aluminium alloys - Anodizing - Part 2: Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method
铝和铝合金.阳极氧化.第2部分:阳极氧化涂层单位面积质量（表面密度）的测定.重量法；德文版EN 12373-2:1998

1999-02-01

现行

UNE-EN 12373-2-1999

ALUMINIUM AND ALUMINIUM ALLOYS. ANODIZING. PART 2: DETERMINATION OF MASS PER UNIT AREA (SURFACE DENSITY) OF ANODIC OXIDATION COATINGS - GRAVIMETRIC METHOD.
铝和铝合金 阳极氧化 第2部分:阳极氧化涂层单位面积质量（表面密度）的测定.重量法

1999-05-31

现行

UNE-EN 12373-16-2002

Aluminium and aluminium alloys. Anodizing. Part 16: Check for continuity of thin anodic oxidation coatings. Copper sulfate test.
铝和铝合金 阳极氧化 第16部分:检查薄阳极氧化涂层的连续性 硫酸铜试验

2002-04-16

现行

JIS H 8683-3-2013

Anodizing of aluminium and its alloys -- Assessment of quality of sealed anodic oxidation coatings -- Part 3: Measurement of admittance
铝及铝合金阳极氧化密封阳极氧化膜质量的评定第3部分:导纳的测量

2013-01-01

现行

GB/T 20975.3-2020

铝及铝合金化学分析方法 第3部分：铜含量的测定
Methods for chemical analysis of aluminium and aluminium alloys—Part 3：Determination of copper content

2020-06-02

现行

JIS H 8680-3-2013

Anodizing of aluminium and its alloys -- Determination of thickness of anodic oxidation coatings -- Part 3: Non-destructive measurement by split-beam microscope
铝及铝合金阳极氧化阳极氧化膜厚度的测定第3部分:分光显微镜无损测量

2013-01-01

现行

DIN EN 546-3

Aluminium and aluminium alloys - Foil - Part 3: Tolerances on dimensions
铝和铝合金箔第3部分:尺寸公差

2007-03-01