精密机械用紧固件 十字槽自攻螺钉 刮削端
Fasteners for fine mechanics--Cross recessed tapping screws--Scrape point

1992-11-05

紧固件公差 用于精密机械的螺栓、螺钉和螺母
Tolerances for fasteners--Bolts，screws and nuts for fine mechanics

1982-05-22

紧固件机械性能 细晶非调质钢螺栓、螺钉和螺柱
Mechanical properties of fasteners made of the fine grain non-heat treatment steel - Bolts,screws and studs

2009-10-15

Mechanical properties of fasteners made of carbon steel and alloy steel-Set screws and similar threaded fasteners with specified hardness classes. Coarse thread and fine pitch thread
碳钢和合金钢制紧固件的机械性能

2012-06-30

Механические свойства крепежных изделий из углеродистых и легированных сталей. Часть 5. Установочные винты и аналогичные резьбовые крепежные изделия установленных классов твердости с крупным и мелким шагом резьбы
由碳钢和合金钢制成的紧固件的机械性能 第5部分 固定螺丝和类似的螺纹紧固件 具有规定的硬度等级 粗螺纹和细螺距螺纹

2014-12-05

Mechanical properties of fasteners made of carbon steel and alloy steel — Part 5: Set screws and similar threaded fasteners with specified hardness classes — Coarse thread and fine pitch thread
碳钢和合金钢制紧固件的机械性能第5部分:规定硬度等级的固定螺钉和类似螺纹紧固件；粗牙和细牙螺纹

2012-05-30

Mechanical properties of fasteners made of carbon steel and alloy steel-Bolts, screws and studs with specified property classes. Coarse thread and fine pitch thread
碳钢和合金钢制紧固件的机械性能

2013-01-31

Mechanical properties of fasteners made of carbon steel and alloy steel -- Bolts, screws and studs with specified property classes -- Coarse thread and fine pitch thread
碳钢和合金钢制紧固件机械性能规定性能等级的螺栓、螺钉和螺柱粗牙螺纹和细牙螺纹

2014-01-01

Механические свойства крепежных изделий из углеродистых и легированных сталей. Часть 1. Болты, винты и шпильки установленных классов прочности с крупным и мелким шагом резьбы
由碳钢和合金钢制成的紧固件的机械性能 具有粗细和细间距螺纹的指定属性等级的螺栓 螺钉和螺柱

2014-10-20

Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread
碳钢和合金钢制紧固件的机械性能第1部分:规定性能等级的螺栓、螺钉和螺柱；粗牙和细牙螺纹

2013-01-14

BS EN ISO 898-5. Mechanical properties of fasteners made of carbon steel and alloy steel. Part 5. Set screws and similar threaded fasteners with specified hardness classes. Coarse thread and fine pitch thread
BS EN ISO 898-5 碳钢和合金钢制紧固件的机械性能 第五部分 具有规定硬度等级的固定螺钉和类似螺纹紧固件 粗牙和细牙螺纹

2010-07-21

Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2009)
碳钢和合金钢制紧固件的机械性能.第1部分:规定性能等级的螺栓、螺钉和螺柱.粗牙螺纹和细牙螺纹（ISO 898-1-2009）

2010-05-19