This part of IEC 61000 for emission requirements applies to electrical and electronic equipment intended for use within the environment existing at industrial (see 3.1.12) locations.
This document does not apply to equipment that fall within the scope of IEC 61000-6-3.
The environments encompassed by this document cover both indoor and outdoor locations.
Emission requirements in the frequency range 9 kHz to 400 GHz are covered in this document and have been selected to provide an adequate level of protection of radio reception in the defined electromagnetic environment. No measurement needs to be performed at frequencies where no requirement is specified. These requirements are considered essential to provide an adequate level of protection to radio services.
Not all disturbance phenomena have been included for testing purposes but only those considered relevant for the equipment intended to operate within the environments included within this document.
Requirements are specified for each port considered.
This generic EMC emission standard is to be used where no applicable product or product-family EMC emission standard is available.Cross References:CISPR 16-2-3:2016CISPR 32:2015EN 55016-1-2:2014CISPR 16-4-2:2011/AMD1:2014EN 55011:2016CISPR 16-1-6:2014EN 55016-1-4:2010/A1:2012EN 55014-1:2017CISPR 16-4-2:2011EN 55011:2016/A1:2017EN 55016-1-6:2015IEC 60050-161:1990EN 55032:2015CISPR 14-1:2016EN 55016-2-1:2014EN 55016-4-2:2011/A1:2014EN 55016-1-4:2010CISPR 16-1-6:2014/AMD1:2017CISPR 16-1-4:2010/AMD1:2012CISPR 11:2015IEC 61000-4-20:2010CISPR 16-1-1:2015EN 55016-1-4:2010/A2:2017EN 61000-4-20:2010EN 55016-4-2:2011EN 55016-1-6:2015/A1:2017EN 55016-2-1:2014/A1:2017CISPR 16-1-2:2014CISPR 16-2-1:2014CISPR 16-1-4:2010/AMD2:2017EN 55016-2-3:2017CISPR 16-1-4:2010CISPR 11:2015/AMD1:2016CISPR 16-2-1:2014/AMD1:2017EN 61000-6-1IEC 61000-6-3IEC 61158 (series)EN 61158 (series)EN 61000-6-3IEC 61000-6-1Incorporates the following:Amendment