MIL MIL-STD-1261C-结构钢电弧焊规程（代替MIL-STD-1261B）（无S/S文件）-国家数字标准馆

现行

MIL MIL-STD-1261C Notice 6-Cancellation 1

ARC WELDING PROCEDURES FOR CONSTRUCTIONAL STEELS (SUPERSEDING MIL-STD-1261B)
结构钢电弧焊工艺（代替MIL-STD-1261B）

2017-03-23

现行

MIL MIL-STD-1261C Notice 4-Inactivation

ARC WELDING PROCEDURES FOR CONSTRUCTIONAL STEELS(SUPERSEDING MIL-STD-1261B) (NO S/S DOCUMENT)
结构钢电弧焊工艺（取代MIL-STD-1261B）（无S/S文件）

1998-05-14

现行

MIL MIL-STD-1261C Notice 3-Reactivation

ARC WELDING PROCEDURES FOR CONSTRUCTIONAL STEELS(SUPERSEDING MIL-STD-1261B) (NO S/S DOCUMENT)
结构钢电弧焊工艺（取代MIL-STD-1261B）（无S/S文件）

1998-05-12

现行

MIL MIL-STD-1261C Notice 5-Cancellation

ARC WELDING PROCEDURES FOR CONSTRUCTIONAL STEELS(SUPERSEDING MIL-STD-1261B) (NO S/S DOCUMENT)
结构钢电弧焊工艺（取代MIL-STD-1261B）（无S/S文件）

2003-07-28

现行

MIL MIL-STD-1261C Change Notice 1

ARC WELDING PROCEDURES FOR CONSTRUCTIONAL STEELS(SUPERSEDING MIL-STD-1261B) (NO S/S DOCUMENT)
结构钢的ARC焊接程序（取代MIL-STD-1261B）（无S/S文件）

1991-02-05

现行

MIL MIL-W-8611A Notice 1-Cancellation

WELDING, METAL ARC AND GAS, STEELS, AND CORROSION AND HEAT RESISTANT ALLOYS; PROCESS FOR (SUPERSEDING MIL-W-8611) (S/S BY MIL-STD-2219)
焊接金属电弧和气体钢和腐蚀和耐热合金; （取代MIL-W-8611）（MIL-STD-2219的S/S）

1990-03-15

现行

MIL MIL-S-24149/1D

STUD, WELDING, AND ARC SHIELDS (FERRULES); TYPE I, CLASS 1, 2, 3, AND TYPE II, CLASS 1, 4, 5, 5A, 6, CARBON STEEL, FOR DIRECT ENERGY, ARC WELDING (SUPERSEDING MIL-S-24149/1C)
螺柱、焊接和电弧屏蔽（套圈）；I型1、2、3类和II型1、4、5、5A、6类碳钢用于直接电弧焊（代替MIL-S-24149/1C）

1988-06-10

现行

MIL MIL-S-24149/1D Notice 1-Cancellation 1

STUD, WELDING, AND ARC SHIELDS (FERRULES); TYPE I, CLASS 1, 2, 3, AND TYPE II, CLASS 1, 4, 5, 5A, 6, CARBON STEEL, FOR DIRECT ENERGY, ARC WELDING (SUPERSEDING MIL-S-24149/1C)
螺柱、焊接和电弧屏蔽（套圈）；I型1、2、3级和II型1、4、5、5A、6级碳钢用于直接能量电弧焊（取代MIL-S-24149/1C）

2000-06-29

现行

MIL MIL-S-24149/1D Notice 2-Reactivation 1

STUD, WELDING, AND ARC SHIELDS (FERRULES); TYPE I, CLASS 1, 2, 3, AND TYPE II, CLASS 1, 4, 5, 5A, 6, CARBON STEEL, FOR DIRECT ENERGY, ARC WELDING (SUPERSEDING MIL-S-24149/1C)
螺柱、焊接和电弧屏蔽（套圈）；I型1、2、3级和II型1、4、5、5A、6级碳钢用于直接能量电弧焊（取代MIL-S-24149/1C）

2000-08-21

现行

MIL MIL-S-24149/3D

STUDS, WELDING, & ARC SHIELDS (FERRULES); TYPE V, CLASS 1, 4, 5, 5A, CORROSION-RESISTANT STEEL, FOR DIRECT ENERGY ARC WELDING (SUPERSEDING MIL-S-24149/3C) (S/S BY NASM24149/3)
螺柱、焊接和电弧屏蔽（套圈）；V型1、4、5、5A级耐腐蚀钢用于直接电弧焊（取代MIL-S-24149/3C）（由NASM24149/3提供）

1989-03-27

现行

MIL MIL-S-24149/3D Notice 2-Reactivation 1

STUDS, WELDING, & ARC SHIELDS (FERRULES); TYPE V, CLASS 1, 4, 5, 5A, CORROSION-RESISTANT STEEL, FOR DIRECT ENERGY ARC WELDING (SUPERSEDING MIL-S-24149/3C) (S/S BY NASM24149/3)
螺柱、焊接和电弧屏蔽（套圈）；V型 1、4、5、5A级耐腐蚀钢用于直接能量电弧焊（取代MIL-S-24149/3C）（由NASM24149/3制成）

2000-08-21

现行

MIL MIL-S-24149/4C

STUDS, WELDING, TYPE VI, CLASS 1, 2, 3, CARBON STEEL, FOR STORED ENERGY (CAPACITOR DISCHARGE) ARC WELDING (SUPERSEDING MIL-S-24149/4B) (S/S BY NASM24149/4)
储能（电容器放电）电弧焊（代替MIL-S-24149/4B）用第VI类1、2、3级碳钢焊接螺柱（由NASM24149/4提供）

1989-03-27

现行

MIL MIL-S-24149/4C Notice 1-Cancellation 1

STUDS, WELDING, TYPE VI, CLASS 1, 2, 3, CARBON STEEL, FOR STORED ENERGY (CAPACITOR DISCHARGE) ARC WELDING (SUPERSEDING MIL-S-24149/4B) (S/S BY NASM24149/4)
焊接双头螺栓 VI型 1、2、3级碳钢用于储能（电容器放电）电弧焊（取代MIL-S-24149/4B）（根据NASM24149/4 S/S）

2000-06-29

现行

MIL MIL-S-24149/4C Notice 2-Reactivation 1

STUDS, WELDING, TYPE VI, CLASS 1, 2, 3, CARBON STEEL, FOR STORED ENERGY (CAPACITOR DISCHARGE) ARC WELDING (SUPERSEDING MIL-S-24149/4B) (S/S BY NASM24149/4)
焊接双头螺栓 VI型 1、2、3级碳钢用于储能（电容器放电）电弧焊（取代MIL-S-24149/4B）（根据NASM24149/4 S/S）

2000-08-21

现行

AWS B2.1-1-314-2018

Standard Welding Procedure Specification for Naval Applications (SWPS-N) for Gas Tungsten Arc Welding with Consumable Insert Root of Carbon Steel (S-1), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, MIL-MS-1 and MIL-70S-2, in the As-Welded or PWHT Condition, Primarily Pipe for Naval Applications
海军应用标准焊接工艺规范（SWPS-N）在焊态或焊后热处理条件下使用1/8英寸[3毫米]至1-1/2英寸[38毫米]厚的碳钢（S-1）自耗镶块根部进行钨极气体保护焊 MIL-MS-1和MIL-70S-2 主要用于海军应用的管道

2018-08-03

现行

AWS B2.1-1-315-2018

Standard Welding Procedure Specification for Naval Applications (SWPS-N) for Gas Tungsten Arc Welding with Consumable Insert Root of Carbon Steel (S-1), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, MIL-MS-1 and MIL-70S-2, in the As-Welded or PWHT Condition, Primarily Pipe for Naval Applications
海军应用标准焊接工艺规范（SWPS-N）在焊态或焊后热处理条件下使用1/8英寸[3毫米]至1-1/2英寸[38毫米]厚的碳钢（S-1）自耗镶块根部进行钨极气体保护焊 MIL-MS-1和MIL-70S-2 主要用于海军应用的管道

2018-08-03

现行

MIL MIL-S-24149/6C

STUDS, WELDING, TYPE VIII, CLASS 1, 2, 3, CORROSION-RESISTANT STEEL FOR STORED ENERGY (CAPACITOR DISCHARGE) ARC WELDING (SUPERSEDING MIL-S-24149/6B) (S/S BY NASM24149/6)
储能（电容器放电）电弧焊用耐腐蚀钢VIII型1、2、3级焊接螺柱（替代MIL-S-24149/6B）（NASM24149/6标准S/S）

1989-03-27

现行

MIL MIL-S-24149/6C Notice 1-Cancellation 1

STUDS, WELDING, TYPE VIII, CLASS 1, 2, 3, CORROSION-RESISTANT STEEL FOR STORED ENERGY (CAPACITOR DISCHARGE) ARC WELDING (SUPERSEDING MIL-S-24149/6B) (S/S BY NASM24149/6)
焊接螺柱 VIII型 1、2、3级储能（电容器放电）电弧焊用耐腐蚀钢（代替MIL-S-24149/6B）

2000-06-29

现行

MIL MIL-S-24149/6C Notice 2-Reactivation 1

STUDS, WELDING, TYPE VIII, CLASS 1, 2, 3, CORROSION-RESISTANT STEEL FOR STORED ENERGY (CAPACITOR DISCHARGE) ARC WELDING (SUPERSEDING MIL-S-24149/6B) (S/S BY NASM24149/6)
焊接螺柱 VIII型 1、2、3级储能（电容器放电）电弧焊用耐腐蚀钢（代替MIL-S-24149/6B）

2000-08-21

现行

1A1W1S1 Archive Product 464

Standard Welding Procedure Specification for Naval Applications (SWPS-N) for Shielded Metal Arc Welding of Carbon Steel (S-1), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, MIL-7018-M, in the As-Welded or PWHT Condition, Primarily Pipe for Naval Applications
MIL-7018-M 厚度为1/8英寸[3 mm]至1-1/2英寸[38 mm]的碳钢（S-1）在焊态或焊后热处理条件下主要用于海军应用的管道的保护金属极电弧焊的海军应用标准焊接工艺规范（SWPS-N）

2015-11-10