Limits and fits for engineering-Guide to tolerances, limits and fits for large diameters
工程的极限和适用性

2009-09-30

Limits and fits for engineering-Guide to the selection of fits in BS 1916-1
工程的极限和适用性

2009-09-30

Допуски и посадки. Классы точности 02-09
限制和适合 容忍度02-09

ISO system of limits and fits -- Part 1: Bases of tolerances, deviations and fits
ISO极限和配合体系第1部分:公差、偏差和配合的基础

1998-01-01

ISO system of limits and fits -- Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts
ISO极限和配合体系第2部分:孔和轴的标准公差等级和极限偏差表

1998-01-01

Limits and Fits - International Metric Tolerance System (Stabilized: Aug 2018)
极限和配合-国际公制公差系统（稳定:2018年8月）

2018-08-09

极限与配合 尺寸至18 mm孔、轴公差带
Limits and fits--Tolerance zones for holes and shafts size up to 18mm

2003-03-06

ISO-limits and fits; selection of tolerance zones for fine-mechanics, tolerance zones, nominal deviations
ISO限制和配合；精细机械公差带、公差带、标称偏差的选择

1978-03-01

Guide to Limited Engine Monitoring Systems for Aircraft Gas Turbine Engines
飞机燃气轮机发动机有限发动机监控系统指南

2016-11-29

Standard Guide for Use of Activity and Use Limitations, Including Institutional and Engineering Controls
活动和使用限制的使用标准指南 包括机构和工程控制

2024-08-01

计时仪器用极限与配合 公称尺寸至18 mm插入中间公差等级的标准公差数值
Limits and fits for timekeeping instruments - Standard tolerance value of inserted middle tolerance grade for nominal size up to 18 mm

2015-10-10

Standard Guide for Statistically Evaluating Measurand Alarm Limits when Using Oil Analysis to Monitor Equipment and Oil for Fitness and Contamination
使用油分析监测设备和油的适用性和污染时统计评估测量报警限值的标准指南

2021-10-01

Limits and fits. Guidance for system of cone (taper) fits and tolerances for cones from C = 1:3 to 1:500, lengths from 6 mm to 630 mm and diameters up to 500 mm
限制和配合 C=1:3至1:500、长度为6毫米至630毫米、直径为500毫米的圆锥（锥形）配合系统和公差指南

2009-09-30

ISO metric coarse and fine pitch screw threads for interference fits in aluminium cast alloys with diameters from 5 mm to 16 mm - Nominal sizes, tolerances and limits of size
ISO公制螺纹；铝铸造合金过盈配合用粗螺距螺纹和细螺距螺纹；标称直径为5mm至16mm；标称尺寸、公差和尺寸限值

1993-07-01