1.1这些测试方法包括指甲测试程序。所选的一个或多个测试以及合规性要求将符合适用产品标准的规定。由于试验方法D 1761涵盖了拔钉和侧向负载能力的性能试验，因此不包括拔钉和侧向负载能力的性能试验 . 1.2所述试验如下: 部分 尺寸测试 5. 张力试验 6. 常规弯曲试验 7. 冲击弯曲试验 8. 洛氏硬度试验 9 涂层重量测试 10 镀锌指甲的涂层附着力试验 11 1.3 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全和健康实践，并确定监管限制的适用性。 1.4以英寸-磅为单位的数值应视为标准值。括号中给出的值是到国际单位制的数学转换，仅供参考，不被视为标准值。 ====意义和用途====== 如有规定，应进行选择用于应用的试验，以确保符合产品规范中规定的要求。

1.1 These test methods cover procedures for the testing of nails. The test or tests selected, and the requirements for compliance, will be as specified in the applicable product standard. Performance tests for nail withdrawal and lateral load capability are not included as they are covered by Test Methods D 1761 . 1.2 The tests described are as follows: Section Dimensional tests 5 Tension test 6 Conventional bend test 7 Impact bend test 8 Rockwell hardness test 9 Coating weight test 10 Coating adherence test for zinc-coated nails 11 1.3 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. ====== Significance And Use ====== When specified, the tests selected for application shall be performed to assure conformance with requirements stipulated in the product specification.