IEC 60384-8:20 24作为IEC 60384-8:20 24 RLV提供，其中包含国际标准及其红线版本，显示了与上一版本相比技术内容的所有变化。IEC 60384-8:20 24适用于固定电容器具有规定温度系数的陶瓷电介质（电介质1类），旨在用于电子设备，包括无引线电容器，但不包括IEC 60384-21（1类）涵盖的陶瓷电介质固定表面贴装多层电容器。不包括用于电磁干扰抑制的电容器，但IEC 60384-14涵盖了这些电容器。本文件的目的是规定首选的额定值和特性，从IEC 60384-1:20 21中选择适当的质量评估程序、测试和测量方法，并给出此类电容器的一般性能要求。参考本文件的详细规范中规定的测试严重性和要求提供了同等或更高性能水平的特定测试严重性和要求。有关通用、分段和详细规范概念的更多信息，请参见IEC 60384-1:20 21的介绍。 与上一版相比，此版本包括以下重大技术变更: a)该文件已完全重组，以符合ISO/IEC指令第2部分并使其更易于使用；表、图和参考文献已作相应修订。附件X包含条款/子条款编号变更的所有交叉引用。 b)术语已被表3中的字母符号取代。 c）在表4、表6、表8、表9、表11、表13、表16和附录B中增加了C0G、U2J的温度系数和公差代码。d)附件B已从资料性改为规范性。 e)新增条款C.5（质量符合性检查的试验计划），撤回空白详细规范:IEC 60384-8-1。

IEC 60384-8:2024 is available as IEC 60384-8:2024 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.

IEC 60384-8:2024 is applicable to fixed capacitors of ceramic dielectric with a defined temperature coefficient (dielectric Class 1), intended for use in electronic equipment, including leadless capacitors but excluding fixed surface mount multilayer capacitors of ceramic dielectric, which are covered by IEC 60384-21 (Class 1). Capacitors for electromagnetic interference suppression are not included, but are covered by IEC 60384-14. The object of this document is to specify preferred ratings and characteristics and to select from IEC 60384-1:2021, the appropriate quality assessment procedures, tests and measuring methods and to give general performance requirements for this type of capacitor. Test severities and requirements specified in detail specifications referring to this document provide specific test severities and requirements of an equal or higher performance level. Further information on the conception of generic, sectional and detail specifications can be found in the Introduction of IEC 60384-1:2021.
This edition includes the following significant technical changes with respect to the previous edition:
a) The document has been completely restructured to comply with ISO/IEC Directives, Part 2 and to make it more useable; tables, figures and references have been revised accordingly. Annex X contains all cross-references of changes in clause/subclause numbers.
b) The terms have been replaced by the letter symbols in Table 3.
c) Code of temperature coefficient and tolerance of C0G, U2J have been added in Table 4, Table 6, Table 8, Table 9, Table 11, Table 13, Table 16 and Annex B.
d) Annex B has been changed from informative to normative.
e) Clause C.5 (Test schedule for quality conformance inspection) has been newly added to withdraw the blank detail specification: IEC 60384-8-1.