BS PD ISO/TS 15311-2:2018为印刷品购买者和其他印刷品用户提供了指南，用于评估各向同性基底上的印刷品，这些基底通常保持在30到50厘米的观看距离。它规定了在一般商业市场中正确应用所需、推荐和可选的指标、测量方法，以及在适当情况下的报告要求。虽然本文件预计主要用于测量数字打印系统的打印，但度量标准是通用的，可能适用于其他类型的打印。本文件未提供过程控制目标或公差，因为这些目标或公差对于不同类型的商业应用存在很大差异。 交叉引用:ISO 13655ISO/TS 15311-1ISO 8254-1ISO/PAS 15339（所有部分）ISO 12647-8ISO 12647-7ISO 12642（所有部分）ISO 12640ISO/IEC/TS 29112ASTM F 1478-06ISO/IEC TS 24790:2012ISO 18947:2013ISO 15930-7:2010ISO 15930-1:2001购买本文件时可提供的所有当前修订。

BS PD ISO/TS 15311-2:2018 gives guidance to print buyers and other users of print for assessing printed products on isotropic substrates that are typically held at a viewing distance of 30 to 50 cm. It specifies the proper application of required, recommended and optional metrics, measurement methods and, where appropriate, reporting requirements in the general commercial market.Although this document is expected to be used primarily to measure prints from digital printing systems the metrics are general and may be applied to other kinds of print.This document does not provide process control aims or tolerances as these differ widely for different types of commercial applications.Cross References:ISO 13655ISO/TS 15311-1ISO 8254-1ISO/PAS 15339 (all parts)ISO 12647-8ISO 12647-7ISO 12642 (all parts)ISO 12640ISO/IEC/TS 29112ASTM F 1478-06ISO/IEC TS 24790:2012ISO 18947:2013ISO 15930-7:2010ISO 15930-1:2001All current amendments available at time of purchase are included with the purchase of this document.