KS C IEC 61212-2-2020-绝缘材料 - 基于用于电气目的的热固性树脂的工业刚性圆形层压管和杆 - 第2部分:测试方法-国家数字标准馆

现行 KS C IEC 61212-2-2020

到馆提醒

收藏跟踪

购买正版

열 경화성 수지제 원통적층 튜브 및 막대 —제2부: 시험방법 绝缘材料 - 基于用于电气目的的热固性树脂的工业刚性圆形层压管和杆 - 第2部分:测试方法

发布日期： 2020-12-29

                该标准规定了KS C IEC61212-1规定的材料的试验方法。按照该标准的材料必须满足规定水平的性能。用户为特定的应用选择材料时，应以该应用中合适性能的必要实际要求为准，不能仅以该标准为准。安全警告（Safety Warning）纳入标准或涉及的安全方法是为作为安全手段而使用的人的责任。

이 표준은 KS C IEC 61212－1에서 규정한 재료에 대한 시험방법에 대하여 규정한다. 이 표준에 따르는 재료는 규정한 수준의 성능을 충족해야 한다. 사용자가 특정한 응용을 위해 재료를 선 택하는 경우 해당 응용에서 적합한 성능의 필요한 실제 요구사항을 기준으로 해야 하며, 이 표준만을 기 준으로 해서는 안 된다. 안전 경고(Safety Warning) 이 표준에 포함되거나 관련된 안전에 대한 방법은 안전에 대한 수단으로 사용하기 위해 사용하는 자의 책임이다.

分类信息

发布单位或类别：韩国-韩国标准

ICS分类： 29.035.01绝缘材料 - 绝缘材料综合

关联关系

研制信息

相似标准/计划/法规

BS EN 61212-3-3-2006

Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes-Specifications for individual materials-Round laminated moulded rods
绝缘材料电气用热固性树脂工业硬质圆形层压管和棒

BS EN 61212-3-2-2013

Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes-Specifications for individual materials. Sheet 2: Round laminated moulded tubes
绝缘材料电气用热固性树脂工业硬质圆形层压管和棒

BS EN 61212-3-1-2013

Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes-Specifications for individual materials. Sheet 1: Round laminated rolled tubes
绝缘材料电气用热固性树脂工业硬质圆形层压管和棒

BS EN 61212-2-2006

Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes-Methods of test
绝缘材料电气用热固性树脂工业硬质圆形层压管和棒

KS C IEC 61212-3-3(2018 Confirm)

열경화성 수지재 산업용 적층 튜브 및 막대－제3부：개별재료 규정－제3절：원통 적층 몰드막대
绝缘材料电工用热固性树脂基工业硬质圆形层压管和棒第3部分:单项材料规范活页3:圆形层压模压棒

IEC 61212-3-3-2006

Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Round laminated moulded rods
绝缘材料 - 用于电气目的的基于热固性树脂的工业刚性圆形层压管和杆 - 第3部分:单个材料的规格 - 第3页:圆形层压成型棒

KS C IEC 61212-3-3(2023 Confirm)

열경화성 수지재 산업용 적층 튜브 및 막대－제3부：개별재료 규정－제3절：원통 적층 몰드막대
绝缘材料电工用热固性树脂工业硬质圆层压管和棒第3部分:单项材料规范表3:圆形层压模塑棒

IEC 61212-3-1-2013

Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Round laminated rolled tubes
绝缘材料 - 用于电气目的的基于热固性树脂的工业刚性圆形层压管和杆 - 第3部分:单个材料的规格 - 第1页:圆形层压轧制管

KS C IEC 61212-3-1(2020 Confirm)

열 경화성 수지재 원통적층 튜브 및 막대－제3부：개별 요구사항－제1절：원통적층 튜브
绝缘材料电工用热固性树脂基工业硬质圆层压管和棒第3部分:单项材料规范活页1:圆层压轧管

KS C IEC 61212-3-2

절연재료 — 전기적 목적의 열경화성 수지제 원통 적층 튜브 및 막대 —제3부: 개별 재료에 대한 규격 —제2절: 원통 적층 성형 튜브
绝缘材料 - 基于用于电气用途的热固性树脂的工业刚性圆形层压管和杆 - 第3部分:单个材料的规格 - 第2页:圆形层压成型管

IEC 61212-3-2-2013

Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Round laminated moulded tubes
绝缘材料 - 基于用于电气用途的热固性树脂的工业刚性圆形层压管和杆 - 第3部分:单个材料的规格 - 第2页:圆形层压成型管

GB/T 5132.5-2009

电气用热固性树脂工业硬质圆形层压管和棒第5部分：圆形层压模制棒
Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 5: Round laminated moulded rods

BS EN 61212-1-2006

Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes-Definitions, designations and general requirements
绝缘材料电气用热固性树脂工业硬质圆形层压管和棒

IEC 61212-2-2006

Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 2: Methods of test
绝缘材料.电气用基于热固性树脂的工业刚性圆形层压管和棒.第2部分:试验方法

UNE-EN 61212-3-3-1996

INDUSTRIAL RIGID ROUND LAMINATED TUBES AND RODS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES. PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS. SHEET 3: ROUND LAMINATED MOULDED RODS.
电气用热固性树脂工业硬质圆形层压管和棒第3部分:单项材料规范表3:圆形层压成型杆

UNE-EN 61212-3-2-1996

INDUSTRIAL RIGID ROUND LAMINATED TUBES AND RODS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES. PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS. SHEET 2: ROUND LAMINATED MOULDED TUBES.
电气用热固性树脂工业硬质圆形层压管和棒第3部分:单项材料规范第2页:圆形层压成型管

UNE-EN 61212-3-1-1996

INDUSTRIAL RIGID ROUND LAMINATED TUBES AND RODS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES. PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS. SHEET 1: ROUND LAMINATED ROLLED TUBES.
电气用热固性树脂工业硬质圆形层压管和棒第3部分:单项材料规范活页1:圆形层压轧制管

BS 10/30216000 DC

BS EN 61212-3-2. Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. Part 3-2. Specifications for individual materials. Round laminated moulded tubes
英国标准EN 61212-3-2 绝缘材料电气用热固性树脂工业硬质圆形层压管和棒第3-2部分个别材料的规格圆形层压成型管

BS 10/30215996 DC

BS EN 61212-3-1. Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. Part 3-1. Specifications for individual materials. Round laminated rolled tubes
英国标准EN 61212-3-1 绝缘材料电气用热固性树脂工业硬质圆形层压管和棒第3-1部分个别材料的规格圆层压轧管

KS C IEC 61212-1

절연재료 — 전기적 목적의 열경화성 수지제 원통 적층 튜브 및 막대 — 제1부: 정의, 명칭과 일반 요구사항
绝缘材料 - 基于电气用途的热固性树脂的工业刚性圆形层压管和杆 - 第1部分:定义名称和一般要求

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

关于我们

查新颖性

查有效性

跟踪标准

比对标准

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统