首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 BS PD IEC TS 62607-6-1:2020
到馆提醒
收藏跟踪
购买正版
Nanomanufacturing. Key control characteristics-Graphene-based material. Volume resistivity: four probe method 纳米制造 关键控制特性
发布日期: 2020-07-21
IEC TS 62607的这一部分建立了确定电气钥匙的标准化方法 控制特性 –由石墨烯基材料(如石墨烯薄片)组成的粉末的体积电阻率 石墨烯和/或还原氧化石墨烯,在通过 –使用粉末电阻率测量系统的四探针法。 体积电阻率是衡量粉末型石墨烯产品质量的电学性质,反映了粉末型石墨烯颗粒中的密度依赖性。 体积电导率可以直接由体积电阻率导出。购买本文件时可获得的所有当前修订均包含在购买本文件中。
This part of IEC TS 62607 establishes a standardized method to determine the electrical key control characteristic – volume resistivityfor powder consisting of graphene-based material like flakes of graphene, few layer graphene and/or reduced graphene oxide after preparation of a sample in pellet form by – four probe methodusing powder resistivity measurement system. The volume resistivity is a measure of the quality of powder-type graphene products in terms of electrical property and reflects the density-dependency shown in a pellet of powder-type graphene. The volume conductivity can directly be derived from the volume resistivity.All current amendments available at time of purchase are included with the purchase of this document.
分类信息
发布单位或类别: 英国-英国标准学会
关联关系
研制信息
相似标准/计划/法规
现行
BS PD IEC TS 62607-6-3-2020
Nanomanufacturing. Key control characteristics-Graphene-based material. Domain size: substrate oxidation
纳米制造 关键控制特性
2020-11-02
现行
IEC TS 62607-6-22-2022
Nanomanufacturing - Key control characteristics - Part 6-22: Graphene-based material - Ash content: Incineration
纳米制造.关键控制特性.第6-22部分:石墨烯基材料.灰分含量:焚烧
2022-11-04
现行
IEC TS 62607-6-3-2020
Nanomanufacturing - Key control characteristics - Part 6-3: Graphene-based material - Domain size: substrate oxidation
纳米制造.关键控制特性.第6-3部分:石墨烯基材料.磁畴尺寸:衬底氧化
2020-10-27
现行
IEC TS 62607-6-14-2020
Nanomanufacturing - Key control characteristics - Part 6-14: Graphene-based material - Defect level: Raman spectroscopy
纳米制造.关键控制特性.第6-14部分:石墨烯基材料.缺陷水平:拉曼光谱
2020-10-27
现行
IEC TS 62607-6-18-2022
Nanomanufacturing - Key control characteristics - Part 6-18: Graphene-based material - Functional groups: TGA-FTIR
纳米制造.关键控制特性.第6-18部分:石墨烯基材料.官能团:TGA-FTIR
2022-12-14
现行
KS C IEC TS 62607-6-14
나노제조 — 주요 제어 특성 — 제6-14부: 그래핀 기반 물질 — 결함 수준: 라만 분광법
纳米制造关键控制特性第6-14部分:石墨烯基材料缺陷等级:拉曼光谱
2023-08-25
现行
KS C IEC TS 62607-6-3
나노제조 — 주요 제어 특성 — 제6-3부: 그래핀 기반 물질 — 도메인 크기: 기판 산화법
纳米制造——关键控制特性——第6-3部分:石墨烯基材料——畴尺寸:基底氧化
2023-08-25
现行
IEC TS 62607-6-1-2020
Nanomanufacturing - Key control characteristics - Part 6-1: Graphene-based material - Volume resistivity: four probe method
纳米制造关键控制特性第6-1部分:石墨烯基材料体积电阻率:四探针法
2020-07-08
现行
IEC TS 62607-6-9-2022
Nanomanufacturing - Key control characteristics - Part 6-9: Graphene-based material - Sheet resistance: Eddy current method
纳米制造.关键控制特性.第6-9部分:石墨烯基材料.薄板电阻:涡流法
2022-02-08
现行
IEC TS 62607-6-30-2024
Nanomanufacturing - Key control characteristics - Part 6-30: Graphene-based material - Anion concentration: Ion chromatography method
纳米制造.关键控制特性.第6-30部分:石墨烯基材料.阴离子浓度:离子色谱法
2024-08-13
现行
KS C IEC TS 62607-6-1
나노제조 — 주요 제어 특성 — 제6-1부: 그래핀-기반 물질 — 부피 비저항: 4-탐침 측정법
纳米制造.关键控制特性.第6-1部分:石墨烯基材料.体积电阻率:四探针法
2022-11-11
现行
IEC TS 62607-6-10-2021
Nanomanufacturing - Key control characteristics - Part 6-10: Graphene-based material - Sheet resistance: Terahertz time-domain spectroscopy
纳米制造.关键控制特性.第6-10部分:石墨烯基材料.薄片电阻:太赫兹时域光谱法
2021-10-14
现行
IEC TS 62607-6-19-2021
Nanomanufacturing - Key control characteristics - Part 6-19: Graphene-based material - Elemental composition: CS analyser, ONH analyser
纳米制造关键控制特性第6-19部分:石墨烯基材料元素组成:CS分析仪ONH分析仪
2021-10-14
现行
IEC TS 62607-6-5-2022
Nanomanufacturing - Key control characteristics - Part 6-5: Graphene-based materials - Contact and sheet resistance: transmission line measurement
纳米制造.关键控制特性.第6-5部分:石墨烯基材料.接触电阻和薄层电阻:传输线测量
2022-12-14
现行
BS PD IEC/TS 62607-6-4-2016
Nanomanufacturing. Key control characteristics-Graphene. Surface conductance measurement using resonant cavity
纳米制造 关键控制特性
2016-10-31
现行
IEC TS 62607-6-20-2022
Nanomanufacturing - Key control characteristics - Part 6-20: Graphene-based material - Metallic impurity content: Inductively coupled plasma mass spectrometry
纳米制造.关键控制特性.第6-20部分:石墨烯基材料.金属杂质含量:电感耦合等离子体质谱法
2022-10-11
现行
IEC TS 62607-6-17-2023
Nanomanufacturing - Key control characteristics - Part 6-17: Graphene-based material - Order parameter: X-ray diffraction and transmission electron microscopy
纳米制造.关键控制特性.第6-17部分:石墨烯基材料.顺序参数:X射线衍射和透射电子显微镜
2023-05-03
现行
IEC TS 62607-6-4-2024
Nanomanufacturing - Key control characteristics - Part 6-4: Graphene-based materials - Surface conductance: non-contact microwave resonant cavity method
纳米制造.关键控制特性.第6-4部分:石墨烯基材料.表面电导:非接触微波谐振腔法
2024-02-28
现行
IEC TS 62607-6-6-2021
Nanomanufacturing - Key control characteristics - Part 6-6: Graphene - Strain uniformity: Raman spectroscoopy
纳米制造.关键控制特性.第6-6部分:石墨烯.应变均匀性:拉曼光谱
2021-10-14
现行
IEC TS 62607-6-11-2022
Nanomanufacturing - Key control characteristics - Part 6-11: Graphene - Defect density: Raman spectroscopy
纳米制造.关键控制特性.第6-11部分:石墨烯.缺陷密度:拉曼光谱
2022-02-08