1.1 本规范涵盖以下几种等级的电解锰: 等级 有规律的 A. 中间氢 B 低氢 C 4.5 % 含氮 D 6. % 含氮 E 焊接级粉末 F 1.2 单位- 以国际单位制或英寸-磅单位表示的数值应单独视为标准值。每个系统中规定的值可能不是精确的等效值；因此，每个系统应相互独立使用。将两个系统的值合并可能会导致不符合标准。 1.2.1 本规范以英寸-磅单位和国际单位表示（在本文中，国际单位显示在括号中）；但是，除非采购订单或合同规定了适用的M规格名称（国际单位制），否则英寸-磅单位应适用。 1.3 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。

1.1 This specification covers several grades of electrolytic manganese designated as follows: Grade Regular A Intermediate Hydrogen B Low Hydrogen C 4.5 % Nitrogen Bearing D 6 % Nitrogen Bearing E Weld Grade Powder F 1.2 Units— The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard. 1.2.1 This specification is expressed in both inch-pound units and in SI units (within the text, the SI units are shown in brackets); however, unless the purchase order or contract specifies the applicable M specification designation (SI units), the inch-pound units shall apply. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.