1.1 本规范适用于高中和大学级别的摔跤比赛垫。所有的垫子结构都包括在内，除了缝在被子里的毡芯垫子。本标准的预期用途是对建筑设计进行鉴定。 注1: 截至本规范发布之时，已知结构为:( 1. )具有聚氯乙烯（PVC）或PVC共聚物涂层或两者的闭孔泡沫芯，它们是垫子的组成部分；( 2. )带有织物覆盖物的闭孔泡沫芯；( 3. )泡沫芯，开孔或闭孔，封闭在缝合的松散覆盖物中，以及( 4. )模制开孔PVC泡沫，一个表面上有致密的表皮，是垫子的组成部分。 注2: 目前还没有与该标准等效的ISO。 1.2 本规范涵盖了两种主要摔跤风格的垫子:美国大学或高中摔跤和国际自由式摔跤。 1.3 以英寸-磅为单位的数值应视为标准。括号中给出的值是国际单位制的数学转换，仅供参考，不被视为标准。 1.4 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的使用者有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 看见 注释6 具体危险说明。 1.5 本国际标准是根据世界贸易组织技术性贸易壁垒委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认的标准化原则制定的。 ===意义和用途====== 5.1 垫子的构造应符合 表1 在制造商保修的条件下，在整个垫子区域。 5.2 垫子的特殊要求应以采购协议为准。特殊要求不得减少本标准中列出的任何基本要求。 5.3 垫子的施工和检查应采用良好的制造规范。

1.1 This specification covers competition wrestling mats used at the high school and college levels. All mat constructions are included, except felt-core mats enclosed in sewn covers. The intended use of this standard is for the qualification of construction designs. Note 1: The known constructions, as of the issuance of this specification are: ( 1 ) closed-cell foam cores with polyvinyl chloride (PVC) or PVC copolymer coatings, or both, which are integral parts of the mat; ( 2 ) closed-cell foam cores with attached fabric cover; ( 3 ) foam cores, either open- or closed-cell enclosed in sewn, loose covers, and ( 4 ) molded open-cell PVC foam with a dense skin on one surface which is an integral part of the mat. Note 2: There is no known ISO equivalent to this standard. 1.2 This specification covers mats used in the two major styles of wrestling: U.S. collegiate or high school, and international free style. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. See Note 6 for specific hazards statements. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 5.1 The mats shall be constructed to yield the values listed in Table 1 throughout the mat area under the conditions of the manufacturer's warranty. 5.2 Special requirements for the mats shall be subject to purchase agreements. Special requirements shall never reduce any of the basic requirements listed in this standard. 5.3 Good manufacturing practices shall be used in the construction and inspection of the mats.