Specification for chromium-molybdenum steel tube (770 MPa) (weldable)
铬钼钢管（770MPa）（可焊接）规范

1978-11-30

Specification for chromium-molybdenum steel tube (700 MPa) (outside diameter not less than 12.5 mm) (weldable)
铬钼钢管（700MPa）（外径不小于12.5mm）（可焊接）规范

1980-02-29

Specification for 2 ½% nickel-chromium-molybdenum steel tubes (1160 MPa)
2%镍铬钼钢管（1160 MPa）规范

2013-04-30

Specification for chromium-molybdenum steel tube (1150 MPa) (maximum thickness 8 mm)
铬钼钢管规范（1150 MPa）（最大厚度8 mm）

1980-02-29

Specification for 18/10 chromium-nickel corrosion-resisting steel tube (niobium stabilized: 550 MPa) (weldable)
18/10铬镍耐腐蚀钢管规范（铌稳定:550 MPa）（可焊接）

1980-02-29

Specification for 1% chromium-molybdenum steel billets, bars, forgings and parts (900-1100 MPa: limiting ruling section 40 mm)
1%铬钼钢坯料、棒材、锻件和零件规范（900-1100 MPa:限制截面40 mm）

1977-04-29

Specification for cold drawn 18/10 chromium-nickel corrosion-resisting steel tube (niobium stabilized: 800 MPa) (weldable)
冷拔18/10铬镍耐蚀钢管规范（铌稳定:800MPa）（可焊接）

1980-02-29