1.1 本试验方法包括煅烧石油焦实际密度（RD）的测定。根据定义，当试样的颗粒尺寸小于75时，可获得实际密度 μm（200号筛）。 1.2 以国际单位制表示的数值应视为标准。本标准中不包括其他计量单位。 1.3 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的使用者有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 有关具体的警告声明，请参阅章节 10 和 11.1 。 1.4 本国际标准是根据世界贸易组织技术性贸易壁垒委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认的标准化原则制定的。 ===意义和用途====== 5.1 石油焦的密度直接影响其所用的人造碳和石墨制品的物理和化学性质。因此，密度是煅烧石油焦的主要质量指标，并在焦炭煅烧中用作控制。

1.1 This test method covers the determination of the real density (RD) of calcined petroleum coke. Real density, by definition, is obtained when the particle size of the test specimen is smaller than 75 μm (No. 200 sieve). 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific warning statements, see Sections 10 and 11.1 . 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 5.1 The density of petroleum coke directly influences the physical and chemical properties of the manufactured carbon and graphite artifacts for which it is used. Density, therefore, is a major quality specification of calcined petroleum coke and is used as a control in coke calcination.