IEC 60317-60-1:20 20规定了聚酯玻璃纤维缠绕熔融、未涂漆、裸露或1级或2级漆包矩形铜绕组线的要求，温度指数155。 笔记？对于这种类型的导线，热冲击测试是不合适的，因此不能确定热冲击温度。因此，不能指定基于温度指数和热冲击温度要求的等级。 本文件涵盖的标称导体尺寸范围为: 宽度:最小。2.0 mm最大16.0 mm； 厚度:最小。最大0.80毫米。5.60毫米。

IEC 60317-60-1: 2020 specifies the requirements of polyester glass-fibre wound fused, unvarnished, bare or grade 1 or grade 2 enamelled rectangular copper winding wires, temperature index 155.
NOTE？For this type of wire, the heat shock test is inappropriate and therefore a heat shock temperature cannot be established. Consequently, a class based on the requirements for temperature index and heat shock temperature cannot be specified.
The range of nominal conductor dimensions covered by this document is:
width: min. 2,0 mm max. 16,0 mm;
thickness: min. 0,80 mm max. 5,60 mm.