产品几何技术规范（GPS） 工件与测量设备的测量检验 第4部分：判定规则中功能限与规范限的基础
Geometrical product specifications (GPS)—Inspection by measurement of workpieces and measuring equipment—Part 4: Background on functional limits and specification limits in decision rules

2020-12-14

Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 4: Background on functional limits and specification limits in decision rules
几何产品规范（GPS）——工件和测量设备的测量检验第4部分:判定规则中功能限制和规格限制的背景

2010-04-29

제품의 형상 명세(GPS) —치수 계측 장비 — 제1부: 길이 사이즈 일반 한계 게이지
几何产品规格（gps） - 尺寸测量设备 - 第1部分:线性尺寸的极限量规

2020-11-10

Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 1: Plain limit gauges of linear size
几何产品规格（GPS） - 尺寸测量设备 - 第1部分:线性尺寸的平面极限量规

2015-10-26

제품의 형상 명세(GPS) — 선 치수의공차에 대한 ISO 코드 시스템 —제1부: 공차, 편차 및 끼워맞춤의 기본
产品几何技术规范（GPS）.线性尺寸公差的ISO代码系统.第1部分:公差、偏差和配合的基础

2016-11-30

제품의 형상 명세(GPS) — 선 치수의공차에 대한 ISO 코드 시스템 —제1부: 공차, 편차 및 끼워맞춤의 기본
几何产品规格（Gps） - 线性尺寸公差的Iso代码系统 - 第1部分:公差 偏差和适合度的基础

2016-11-30

Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes — Part 1: Basis of tolerances, deviations and fits
几何产品规范（GPS）——ISO线性尺寸公差代码系统第1部分:公差、偏差和配合的基础

2010-04-16

产品几何技术规范（GPS） 统计公差 第5部分：装配批（孔、轴配合）的统计质量指标
Geometrical product specifications(GPS) - Statistical tolerance - Part 5: Statistical quality indices of an assembly lot (hole/shaft fits)

2011-01-10

产品几何技术规范（GPS） 线性尺寸公差ISO代号体系 第1部分：公差、偏差和配合的基础
Geometrical product specifications (GPS)—ISO code system for tolerances on linear sizes—Part 1: Basis of tolerances, deviations and fits

2020-04-28

Geometrical product specifications (GPS) - Limit plug gauges - Part 2: For holes over 40 mm up to 65 mm nominal diameter
产品几何技术规范（GPS）.极限塞规.第2部分:公称直径大于40mm至65mm的孔

2008-07-01

Geometrical product specifications (GPS) - Limit plug gauges - Part 1: For holes from 1 mm up to 40 mm nominal diameter
产品几何技术规范（GPS）.极限塞规.第1部分:公称直径为1mm至40mm的孔

2008-07-01

제품의 형상 명세(GPS) — 선 치수의 공차에 대한 ISO 코드 시스템 — 제2부:구멍과 축에 대한 기준 공차 등급 및 한계 편차표
几何产品规格（Gps） - 线性尺寸公差的Iso代码系统 - 第2部分:标准公差等级表和孔和极限的偏差

2020-12-31

Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes — Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
几何产品规范（GPS）——ISO线性尺寸公差代码系统第2部分:孔和轴的标准公差等级和极限偏差表

2010-06-07

产品几何技术规范（GPS） 线性尺寸公差ISO代号体系 第2部分：标准公差带代号和孔、轴的极限偏差表
Geometrical product specifications (GPS)—ISO code system for tolerances on linear sizes—Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts

2020-04-28

Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010)
产品几何技术规范（GPS）.线性尺寸公差的ISO代码系统.第2部分:孔和轴的标准公差等级和极限偏差表（ISO 286-2-2010）

2011-03-02

Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 4: Background on functional limits and specification limits in decision rules (ISO/TS 14253-4:2010); German version CEN ISO/TS 14253-4:2010
产品几何技术规范（GPS）.工件和测量设备的测量检验.第4部分:功能极限和判定规则中的规格极限的背景（ISO/TS 14253-4-2010）；德国版CEN ISO/TS 14253-4:2010

2010-11-01