本欧洲标准适用于ISO 4306中定义的安全设备的设计，建造，安装，移动式起重机的使用信息，维护和测试。2.移动式起重机类型的示例见附件A. 本欧洲标准不适用于: - 装载起重机（参见EN 12999） - 离岸起重机（见EN 13852 1） - 浮式起重机（见EN 13852 2） - 可变牵引车（见EN 1459） 注1变速接触卡车通常被称为伸缩臂叉车。 - 移动式自行式塔式起重机 - 用于物体搬运的土方机械（参见EN 474系列）。 本标准不包括与解除人员有关的危险。 注2:使用移动式起重机来解除人员受制于具体的国家规定。 本欧洲标准覆盖的移动式起重机设计用于有限数量的应力循环和运动的特定性质，例如。根据ISO 4301 2:1985 A1组，顺利应用驱动力和装载条件。 对于诸如抓斗，磁铁或类似工作的工作周期，需要额外的规定，这些规定超出了本欧洲标准的范围。 本欧洲标准涵盖的危害由附件C确定。 本文件不适用于制造商的移动式起重机

This European Standard is applicable to the design, construction, installation of safety devices, information for use, maintenance and testing of mobile cranes as defined in ISO 4306 2. Examples of mobile crane types are given in Annex A. This European Standard does not apply to: - loader cranes (see EN 12999) - off-shore cranes (see EN 13852 1) - floating cranes (see EN 13852 2) - variable reach truck (see EN 1459) NOTE 1 Variable Reach Trucks are commonly known as telehandlers. - mobile self-erecting tower cranes - earth-moving machinery used for object handling (see EN 474-series). This standard does not cover hazards related to the lifting of persons. NOTE 2 The use of mobile cranes for the lifting of persons is subject to specific national regulations. Mobile cranes covered by this European Standard are designed for a limited number of stress cycles and particular properties of motions, e.g. smooth application of the driving forces and loading conditions according to ISO 4301 2:1985, group A1. For a duty cycle such as grab, magnet or similar work, additional provisions are required which are outside the scope of this European Standard. The hazards covered by this European Standard are identified by Annex C. This document is not applicable to mobile cranes which are manufactured before the date of publication of this document by CEN.