请注意:此版本的所有临时修订版将在您购买时提供。范围和目的本国际标准系列规定了IEC 60721-2-1中定义的适用于在一般露天气候下长期运行的地面光伏组件的设计鉴定和型式认证的IEC要求。IEC 61215的本部分旨在适用于所有地面平板模块材料，如晶体硅模块类型以及薄膜模块。 本标准不适用于使用集中阳光的组件，尽管它可用于低聚光组件（1到3个太阳）。对于低浓度模块，所有测试均使用设计浓度下预期的电流、电压和功率水平进行。本试验顺序的目的是确定模块的电气和热特性，并在合理的成本和时间限制范围内，尽可能证明模块能够承受一般打开状态下的长时间暴露- 空气气候。如此合格的模块的实际预期寿命将取决于其设计、环境和运行条件。

Please note: All interim revisions for this edition available at time of your purchase will be included.Scope and objectThis International Standard series lays down IEC requirements for the design qualification and type approval of terrestrial photovoltaic modules suitable for long-term operation in general open-air climates, as defined in IEC 60721-2-1. This part of IEC 61215 is intended to apply to all terrestrial flat plate module materials such as crystalline silicon module types as well as thin-film modules.This standard does not apply to modules used with concentrated sunlight although it may be utilized for low concentrator modules (1 to 3 suns). For low concentration modules, all tests are performed using the current, voltage and power levels expected at the design concentration.The objective of this test sequence is to determine the electrical and thermal characteristics of the module and to show, as far as possible within reasonable constraints of cost and time, that the module is capable of withstanding prolonged exposure in general open-air climates. The actual lifetime expectancy of modules so qualified will depend on their design, their environment and the conditions under which they are operated.