首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 ASTM C129-23
到馆提醒
收藏跟踪
购买正版
Standard Specification for Nonloadbearing Concrete Masonry Units 非承重混凝土砌块标准规范
发布日期: 2023-12-01
1.1 本规范涵盖由硅酸盐水泥、水和矿物骨料制成的空心和实心非承重混凝土砌块,包括或不包括其他材料。这些单元旨在用于非承重隔墙,但在某些条件下,它们可能适合用于地面以上的非承重外墙,这些外墙可有效抵御天气。 1.2 本标准的文本引用了提供解释性材料的注释和脚注。这些注释和脚注(不包括表和图中的注释和脚注)不应被视为本标准的要求。 1.3 以英寸磅为单位的数值应视为标准。括号中给出的值是国际单位制的数学转换,仅供参考,不被视为标准。 注1: 本规范涵盖的混凝土砌块由轻质或正常重量的骨料制成,或两者兼而有之。 注2: 当需要特定特征时,如密度分类、外观或粘结的表面纹理、光洁度、颜色、耐火性、绝缘性、声学性能或其他特殊特征,这些特性应由买方单独规定。然而,应就具有所需功能的单元的可用性咨询供应商。 1.4 本国际标准是根据世界贸易组织技术性贸易壁垒委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认的标准化原则制定的。
1.1 This specification covers hollow and solid nonloadbearing concrete masonry units made from portland cement, water, and mineral aggregates with or without the inclusion of other materials. These units are intended for use in nonloadbearing partitions, but under certain conditions they may be suitable for use in nonloadbearing exterior walls above grade where effectively protected from the weather. 1.2 The text of this standard references notes and footnotes that provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. Note 1: Concrete masonry units covered by this specification are made from lightweight or normal weight aggregates, or both. Note 2: When particular features are desired, such as density classification, surface texture for appearance or bond, finish, color, fire resistance, insulation, acoustical properties, or other special features, such properties should be specified separately by the purchaser. However, suppliers should be consulted as to the availability of units having the desired features. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
分类信息
关联关系
研制信息
归口单位: C15.03
相似标准/计划/法规
现行
ASTM C1877-24
Standard Specification for Adhered Concrete Masonry Units
粘结混凝土砌块标准规范
2024-01-15
现行
ASTM C90-24
Standard Specification for Loadbearing Concrete Masonry Units
承重混凝土砌块标准规范
2024-06-15
现行
BS EN 771-4-2011+A1-2015
Specification for masonry units-Autoclaved aerated concrete masonry units
砌体构件规范
2016-03-31
现行
ASTM C331/C331M-23
Standard Specification for Lightweight Aggregates for Concrete Masonry Units
混凝土砌块用轻质骨料标准规范
2023-06-01
现行
BS EN 771-3-2011+A1-2015
Specification for masonry units-Aggregate concrete masonry units (Dense and lightweight aggregates)
砌体构件规范
2016-03-31
现行
UNE-EN 771-4-2004
Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units
砌块规范第4部分:蒸压加气混凝土砌块
2004-07-30
现行
ASTM C1634-23a
Standard Specification for Concrete Facing Brick and Other Concrete Masonry Facing Units
混凝土饰面砖和其他混凝土砌体饰面单元的标准规范
2023-12-01
现行
ASTM C744-21
Standard Specification for Prefaced Concrete and Calcium Silicate Masonry Units
预制混凝土和硅酸钙砌块的标准规范
2021-12-01
现行
ASTM C139-23
Standard Specification for Concrete Masonry Units for Construction of Catch Basins and Manholes
集水池和检修孔施工用混凝土砌块标准规范
2023-12-01
现行
ASTM C1691-21
Standard Specification for Unreinforced Autoclaved Aerated Concrete (AAC) Masonry Units
无钢筋蒸压加气混凝土(AAC)砌块的标准规范
2021-12-01
现行
ASTM C1552/C1552M-23a
Standard Practice for Capping Concrete Masonry Units, Related Units and Masonry Prisms for Compression Testing
压缩试验用混凝土砌块、相关砌块和砌石棱柱盖顶的标准实施规程
2023-12-01
现行
ASTM C1716/C1716M-24
Standard Specification for Compression Testing Machine Requirements for Concrete Masonry Units, Related Units, and Prisms
混凝土砌块、相关砌块和棱镜的压缩试验机要求标准规范
2024-06-01
现行
UNE-EN 771-3-2004
Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and light-weight aggregates)
砌块规范.第3部分:骨料混凝土砌块(密实和轻质骨料)
2004-07-30
现行
ASTM C140/C140M-24
Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
混凝土砌块和相关砌块取样和试验的标准试验方法
2024-06-15
现行
ASTM D4261-05(2024)
Standard Practice for Surface Cleaning Concrete Masonry Units for Coating
涂层用混凝土砌块表面清洁的标准实施规程
2024-06-01
现行
ASTM C270-24
Standard Specification for Mortar for Unit Masonry
砌块用灰浆标准规范
2024-06-15
现行
ASTM C1623-23
Standard Specification for Manufactured Concrete Masonry Lintels
人造混凝土砌体过梁标准规范
2023-12-01
现行
ASTM C426-23
Standard Test Method for Linear Drying Shrinkage of Concrete Masonry Units
混凝土砌块线性干燥收缩的标准试验方法
2023-06-01
现行
UL Subject 618
Standard for Concrete Masonry Units (CSDS Proposal, 10/23/2009)
混凝土砌块标准(CSDS提案 10/23/2009)
2009-10-23
现行
ASTM C1825-19
Standard Guide for Developing Specifications for Masonry Units
砌块规范制定的标准指南
2019-12-01