家用和类似用途的自动电气控制装置；第2部分:能源调节器的特殊要求UL 60730-2-111范围和规范性参考本第1部分的条款适用，但以下情况除外:1.1替换:一般而言，IEC 60730的本部分适用于家用和类似用途设备中使用的能源调节器，包括供暖、空调和类似用途的能源调节器。该设备可以使用电、气、油、固体燃料、太阳能等，或其组合。这些能量调节器可以是热的、机械的或电动的。1.1.1更换:本标准适用于固有安全、与设备安全相关的操作值、操作时间和操作顺序，以及家用或类似设备中或与之相关的自动电能调节装置的测试。 本标准也适用于IEC 60335-1范围内电器的能量调节器。在本标准中，“设备”一词是指“器具和设备”。本标准不适用于专门为工业应用设计的自动电能调节器。本标准也适用于作为控制系统一部分使用的单个能量调节器，或与具有非电气输出的多功能控制装置机械集成的能量调节器。非正常家用设备的能源调节器，但可能会被公众使用，例如商店、轻工业和农场的外行使用的设备，都在本标准的范围内。另见附件J.1.1。 2不适用。1.1.3不适用。1.1.4更换:当手动能量调节器与自动控制装置电气和/或机械集成时，本标准适用于手动能量调节器。IEC 61058-1.1.2《更换:本标准适用于额定电压不超过690 V、额定电流不超过63A的能量调节器》中包含了对不构成自动能量调节器一部分的手动开关的要求。1.3不适用。1.4更换:本标准也适用于包含电子设备的能量调节器，其要求见附录h。本标准也适用于使用NTC或PTC热敏电阻的能量调节器，其附加要求见附录J。

Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Energy RegulatorsUL 60730-2-111 Scope and normative referencesThis clause of Part 1 is applicable except as follows:1.1 Replacement: In general, this part of IEC 60730 applies to energy regulators for use in, on, or in association with equipment for household and similar use, including energy regulators for heating, air conditioning and similar applications. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc. or a combination thereof.These energy regulators may be thermally, mechanically or electrically operated.1.1.1 Replacement: This standard applies to the inherent safety, to the operating values, operating times and operating sequence where such are associated with equipment safety, and to the testing of automatic electrical energy regulator devices used in, or in association with, household or similar equipment.This standard is also applicable to energy regulators for appliances within the scope of IEC 60335-1.Throughout this standard the word "equipment" means "appliance and equipment".This standard does not apply to automatic electrical energy regulators designed exclusively for industrial applications.This standard is also applicable to individual energy regulators utilized as part of a control system or energy regulators which are mechanically integral with multi-functional controls having non-electrical outputs.Energy regulators for equipment not intended for normal household use, but which nevertheless may be used by the public, such as equipment intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard.See also Annex J.1.1.2 Not applicable.1.1.3 Not applicable.1.1.4 Replacement:This standard applies to manual energy regulators when such are electrically and/or mechanically integral with automatic controls.Requirements for manual switches not forming part of an automatic energy regulator are contained in IEC 61058-1.1.2 Replacement:This standard applies to energy regulators with a rated voltage not exceeding 690 V and with a rated current not exceeding 63A.1.3 Not applicable.1.4 Replacement:This standard applies also to energy regulators incorporating electronic devices, requirements for which are contained in Annex h.This standard applies also to energy regulators using NTC or PTC thermistors, additional requirements for which are contained in Annex J.