石油化工钢制管道工程施工技术规程(附条文说明)
Technical specification for construction of steel piping in petrochemical industry

2013-10-17

非金属管道设计、施工及验收规范第2部分：钢骨架增强聚乙烯复合管
Specification for the design, construction and acceptance of non-metallic pipelines-Part 2: Steel skeleton reinforced polythene composite pipes

2018-10-29

Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe
波纹钢管用金属涂层和聚合物预涂层钢板的标准规范

2023-11-01

Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains
波纹钢管标准规格 金属涂层用于下水道和排水管

2020-05-01

非金属管道设计、施工及验收规范 第4部分：钢骨架增强塑料复合连续管
Specifications for the design，construction and acceptance of non - metallic pipelines-Part 4:Steel skeleton reinforced thermoplastic resin coiled composite pipes

2012-11-09

Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe
波纹钢管用热浸镀金属涂层钢板的标准规范

2024-04-01

石油化工有毒、可燃介质钢制管道工程施工及验收规范
Construction and acceptance specification for toxic and combustible fluid steel piping engineering in petrochemical industry

2021-08-21

BOMBS, STEEL, G.P. AND S.A.P., METAL-ARC WELDED, GENERAL SPECIFICATIONS FOR THE CONSTRUCTION OF (NO S/S DOCUMENT)
金属弧焊G.P.和S.A.P.钢制炸弹施工通用规范（无S/S文件）

1979-10-19

Standard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal
添加填充金属的电熔焊铁素体/奥氏体（双相）不锈钢管的标准规范

2021-03-01

非金属管道设计、施工及验收规范 第3部分：热塑性塑料内衬玻璃钢复合管
Specification for the design, construction and acceptance of non-metallic pipelines-Part 3: Thermoplastic lined glass fiber reinforced plastics composite pipes

2018-10-29

Магистральный трубопроводный транспорт нефти и нефтепродуктов. Сваи стальные из труб, применяемые для устройства фундаментов под опоры трубопроводов надземной прокладки. Общие технические условия
石油和石油产品的干线管道运输 钢管桩用于地下管线的基础施工 通用规范

Standard Specification for Metal-Arc-Welded Carbon or High-Strength Low-Alloy Steel Pipe for Use With High-Pressure Transmission Systems
高压传输系统用金属电弧焊接碳或高强度低合金钢管的标准规范

2023-11-01

Piping Material Specification 3SD0J02 Class 300, 316/316L Stainless Steel, Jacketed Construction, 0.000" C.A. Core: Process Jacket: Hot Oil (Complete Revision)
管道材料规范3SD0J02 300级316/316L不锈钢 夹套结构 0.000“C.A.芯:工艺夹套:热油（完整修订）

2006-10-01

Piping Material Specification 1SD0J02 Class 150, 316/316L Stainless Steel, Jacketed Construction, 0.000" C.A. Core: Process Jacket: Hot Oil (Complete Revision)
管道材料规范1SD0J02 150级316/316L不锈钢 夹套结构 0.000“C.A.芯:工艺夹套:热油（完整修订）

2006-10-01

Standard Welding Procedure Specification for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 3/4" Thick, E6010 (Vertical Uphill), As-Welded Condition, Primarily Pipe Applications
1/8至3/4“厚E6010（垂直上坡）焊态碳钢（M-1/P-1/S-1 第1组或第2组）的保护金属极电弧焊标准焊接工艺规范 主要用于管道应用

2019-03-01

Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 in. Thick, ER3XX-XX, As-Welded Condition, Primarily Pipe Applications
1/8至1-1/2英寸奥氏体不锈钢（M-8/P-8/S-8 第1组）的保护金属极电弧焊标准焊接工艺规范（WPS） 厚 ER3XX-XX 焊接状态 主要用于管道应用

1997-03-20

Standard Welding Procedure Specification for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 3/4" Thick, E6010 (Vertical Uphill) Followed by E7018 (Vertical Uphill), As-Welded Condition, Primarily Pipe Applications
1/8至3/4“厚E6010（垂直向上）和E7018（垂直向上）碳钢（M-1/P-1/S-1 第1组或第2组）焊接状态下 主要用于管道应用的保护金属极电弧焊标准焊接工艺规范

2019-03-01

Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-5A/P-5A), E9018-B3, 1/8 through 1/2 in. Thick, As-Welded Condition; 1/8 through 1-1/2 in. Thick, PWHT Condition, Primarily Pipe Applications
铬钼钢（M-5A/P-5A）的保护金属极电弧焊标准焊接工艺规范（SWPS） E9018-B3 1/8至1/2英寸 厚 如焊接状态；1/8至1-1/2英寸 厚 焊后热处理条件 主要用于管道应用

1999-12-08

Standard Welding Procedure Specification for Naval Applications (SWPS-N) for Shielded Metal Arc Welding of Carbon Steel (S-1), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, MIL-7018-M, in the As-Welded or PWHT Condition, Primarily Pipe for Naval Applications
MIL-7018-M 厚度为1/8英寸[3 mm]至1-1/2英寸[38 mm]的碳钢（S-1）在焊态或焊后热处理条件下 主要用于海军应用的管道的保护金属极电弧焊的海军应用标准焊接工艺规范（SWPS-N）

2015-11-10

Standard Welding Procedure Specification (SWPS) forShielded Metal Arc Welding of Chromium-Molybdenum Steel (M-4/P-4, Group 1 or 2), E8018-B2, 1/8 through 1/2 in. Thick, As-Welded Condition; 1/8 through 1-1/2 in. Thick,PWHT Condition, Primarily Pipe Applications
铬钼钢（M-4/P-4 第1组或第2组）屏蔽金属电弧焊的标准焊接工艺规范（SWPS） E8018-B2 1/8至1/2英寸 厚 如焊接状态；1/8至1-1/2英寸 厚 焊后热处理条件 主要用于管道应用

1999-12-08