本文件规定了一种测试方法，用于测量剥离两层用橡胶粘合的织物或一层橡胶和一层粘合在一起的织物所需的力。 该方法适用于铺层表面近似平面或内径大于约50 mm的圆柱体形式。当铺层表面包含锐弯、角度或切割试样时不能排除的其他严重不规则时，该方法不适用。 本文件不适用于根据ISO 2411进行测试的涂层织物，或根据ISO 252进行测试的织物传送带。

This document specifies a method of test for measuring the force required to separate, by stripping, two plies of fabric bonded with rubber, or a rubber layer and a fabric ply bonded together. The method is applicable when the ply surfaces are approximately plane or when they are in the form of a cylinder having an internal diameter greater than approximately 50 mm. The method is not applicable when the ply surfaces contain sharp bends, angles or other gross irregularities which cannot be excluded when cutting out test pieces. This document does not apply to coated fabrics, which are tested in accordance with ISO 2411, or textile conveyor belts, which are tested in accordance with ISO 252.