Specification for 3% chromium-molybdenum steel castings (1150–1300 MPa)
3%铬钼钢铸件（1150-1300 MPa）规范

2012-12-31

Specification for nickel-chromium-molybdenum steel castings (1150-1300 MPa)
镍铬钼钢铸件规范（1150-1300 MPa）

1974-05-10

Specification for chromium-molybdenum steel sheet and strip (1150/1300 Mpa) (suitable for welding)
铬钼钢薄板和带材（1150/1300 Mpa）（适用于焊接）规范

2003-05-27

Specification for chromium-molybdenum steel tube (770 MPa) (weldable)
铬钼钢管（770MPa）（可焊接）规范

1978-11-30

Specification for chromium-molybdenum steel tube (900 MPa) (weldable)
铬钼钢管（900 MPa）（可焊接）规范

1980-02-29

Specification for 2 ½% nickel-chromium-molybdenum steel tubes (1160 MPa)
2%镍铬钼钢管（1160 MPa）规范

2013-04-30

Specification for chromium-molybdenum steel tube (700 MPa) (outside diameter not less than 12.5 mm) (weldable)
铬钼钢管（700MPa）（外径不小于12.5mm）（可焊接）规范

1980-02-29

Specification for chromium-nickel-molybdenum-vanadium heat-resisting steel sheet and strip (930-1130 MPa: maximum thickness 6 mm) (Cr 12, Ni 2.5, Mo 1.7, V 0.3)
铬镍钼钒耐热钢板和钢带规范（930-1130 MPa:最大厚度6 mm）（Cr 12 Ni 2.5 Mo 1.7 V 0.3）

2003-12-09