本SAE推荐规程概述了为制造识别零件而购买的碳钢板和钢带选择适当规格的程序。考虑的规格为:ASTM A109碳钢冷轧带材。ASTM A569工业质量（HRCQ）热轧碳素钢板（最大0.15%）。ASTM A621热轧碳素钢薄板拉伸质量（HRDQ）。ASTM A622特殊镇静钢热轧碳素薄板拉伸质量（HRDQSK）。ASTMA568钢，碳和高强度低合金热轧板和冷轧板，一般要求。ASTM A366钢，碳钢，冷轧薄板，商业质量（CRCQ）。 ASTM A619碳钢薄板，冷轧，拉伸质量（CRDQ）。ASTM A620特殊镇静钢冷轧碳素薄板拉伸质量（CRDQSK）。ASTM A749M《热轧碳素钢和高强度低合金钢一般要求》。ASTM A635工业级热轧厚碳钢板和钢带卷。（公制ASTM文件由后缀M指定）它还描述了在电子数据处理系统中如何使用用于指定特定特性的代码或符号。所涵盖的特征包括:a.热轧或冷轧。b、 薄片或条状物。c、 拉拔的严重程度（钢的质量）。d、 表面状况（光洁度等）。 )e.边缘条件。f、 尺寸。如有必要，本规范的补充文件将涵盖其他特性和零件标识。

This SAE Recommended Practice outlines a procedure for selecting the proper specification for carbon steel sheet and strip which are purchased to make an identified part. Specifications considered are:ASTM A109-Steel, Carbon, Cold Rolled Strip.ASTM A569-Steel, Carbon (0.15 maximum percent), Hot Rolled Sheet, Commercial Quality (HRCQ).ASTM A621-Steel, Sheet, Carbon, Hot Rolled, Drawing Quality (HRDQ).ASTM A622-Steel, Sheet, Carbon, Hot Rolled, Drawing Quality, Special Killed (HRDQSK).ASTMA568-Steel, Carbon and High-Strength Low-Alloy Hot Rolled Sheet, and Cold Rolled Sheet, General Requirements.ASTM A366-Steel, Carbon, Cold Rolled Sheet, Commercial Quality (CRCQ).ASTM A619-Steel, Sheet, Carbon, Cold Rolled, Drawing Quality (CRDQ).ASTM A620-Steel, Sheet, Carbon, Cold Rolled, Drawing Quality, Special Killed (CRDQSK).ASTM A749M-Steel, Carbon and High-Strength Low-Alloy, Hot Rolled Strip, General Requirements.ASTM A635-Steel Sheet and Strip, Carbon, Hot Rolled Commercial Quality, Heavy Thickness Coils. (Metric ASTM documents are designated by suffix M)It also describes how codes or symbols for specifying certain characteristics may be used in electronic data processing systems. Characteristics covered are:a. Hot or cold rolled.b. Sheet or strip.c. Severity of draw (quality of steel).d. Surface condition (finish, etc.).e. Edge condition.f. Dimensions.It is intended that other characteristics and part identification be covered by a supplement to the specification, as necessary.