弹簧盖油杯
Spring cap type lubricating cups

1996-04-14

Lubricating nipples cupped type
杯形润滑嘴

1986-05-01

针阀式注油杯
Drip-feed type lubricating cups

1996-04-14

旋套式注油油杯
Sleeve type drip-feed lubricating cups

2011-05-12

灯头的型式和尺寸 第1部分：螺口式灯头
Types and dimensions of lamp caps - Part 1：Screw caps

2008-04-29

Screwed cap for mounting pin type insulators for overhead power lines up to 1000 V
用于安装1000 V以下架空电力线路针式绝缘子的螺纹帽

1970-11-01

BEARINGS, ROLLER, TAPERED, DOUBLE ROW, STRAIGHT BORE, TWO SINGLE CONES WITH CONTACTING FRONT FACES SLOTTED AND CHAMFERED FOR LUBRICATION, ONE DOUBLE CUP WITH LUBRICATION HOLES AND GROOVE (TYPE TNASW)(SUPERSEDING A-A-59658A)
双列直孔圆锥滚子轴承 两个接触正面开槽和倒角润滑的单内圈 一个带润滑孔和槽的双外圈（TNASW型）（替代A-A-59658A）

2011-09-08

BEARINGS, ROLLER, TAPERED, DOUBLE ROW, STRAIGHT BORE, TWO SINGLE CONES WITH CONTACTING FRONT FACES SLOTTED AND CHAMFERED FOR LUBRICATION, ONE DOUBLE CUP WITH LUBRICATION HOLES AND GROOVE (TYPE TNASW)(SUPERSEDING A-A-59658A)
双列直孔圆锥滚子轴承 两个接触正面开槽和倒角润滑的单内圈 一个带润滑孔和槽的双外圈（TNASW型）（替代A-A-59658A）

2011-09-08

内六角圆柱头螺钉冷镦模 第1部分：A型初镦冲头及顶杆
Cold heading dies for hexagon socket head cap screws - Part 1:Type A punches for primary upsetting and kicker pins

2014-07-14

Standard Specification for Carbon and Alloy Steel Compressible-Washer-Type Direct Tension Indicators for Use with Cap Screws, Bolts, Anchors, and Studs
带帽螺钉、螺栓、锚固件和双头螺栓用碳素钢和合金钢可压缩垫圈型直接张力指示器的标准规范

2023-11-01

BEARINGS, ROLLER, TAPERED, DOUBLE ROW, STRAIGHT BORE, TWO SINGLE CONES, CONE BACK FACE RIB GROUND ON THE OUTER DIAMETER FOR SEALING PURPOSES, ONE DOUBLE CUP WITH LUBRICATION HOLES AND GROOVE (TYPE TNASWE) (SUPERSEDING A-A-59659A)
双列直孔圆锥滚子轴承 两个单锥面 锥面凸缘 外径上研磨用于密封 一个带润滑孔和槽的双杯（TNASWE型）（代替A-A-59659A）

2011-09-08

BEARINGS, ROLLER, TAPERED, DOUBLE ROW, STRAIGHT BORE, TWO SINGLE CONES, CONE BACK FACE RIB GROUND ON THE OUTER DIAMETER FOR SEALING PURPOSES, ONE DOUBLE CUP WITH LUBRICATION HOLES AND GROOVE (TYPE TNASWE) (SUPERSEDING A-A-59659A)
双列直孔圆锥滚子轴承 两个单锥面 锥面凸缘 外径上研磨用于密封 一个带润滑孔和槽的双杯（TNASWE型）（代替A-A-59659A）

2011-09-08