CISPR 16-1-1:2019规定了用于测量9 kHz至18 GHz频率范围内无线电干扰的设备的特性和性能。此外，还规定了用于不连续扰动测量的专用设备的要求。注:根据IEC指南107，CISPR 16-1-1是供IEC产品委员会使用的基本电磁兼容性（EMC）标准。如指南107所述，产品委员会负责确定基本EMC标准的适用性。CISPR及其小组委员会准备与产品委员会合作，评估特定产品的特定EMC测试的价值。本文件中的规范适用于电磁干扰（EMI）接收器和频谱分析仪。本文档中使用的术语“测量接收器”是指EMI接收器和频谱分析仪（另见3.7）。测量接收器的校准要求详见附录J。关于使用频谱分析仪的进一步指导可以在以下任何一个文件的附录B中找到:CISPR 16-2-1:2014、CISPR 16-2-2:2010或CISPR 16-2-3:2016。这第五版取消并取代了2015年出版的第四版。本版构成技术修订版。有关上一版技术变更的完整列表，请参阅文档的前言。 关键词:9 kHz至18 GHz频率范围内的无线电干扰测量

CISPR 16-1-1: 2019 specifies the characteristics and performance of equipment for the measurement of radio disturbance in the frequency range 9 kHz to 18 GHz. In addition, requirements are provided for specialized equipment for discontinuous disturbance measurements. NOTE In accordance with IEC Guide 107, CISPR 16-1-1 is a basic electromagnetic compatibility (EMC) standard for use by product committees of the IEC. As stated in Guide 107, product committees are responsible for determining the applicability of a basic EMC standard. CISPR and its subcommittee are prepared to co-operate with product committees in the evaluation of the value of particular EMC tests for specific products. The specifications in this document apply to electromagnetic interference (EMI) receivers and spectrum analyzers. The term “measuring receiver” used in this document refers to both EMI receivers and spectrum analyzers (see also 3.7). The calibration requirements for measuring receivers are detailed in Annex J. Further guidance on the use of spectrum analyzers can be found in Annex B of any one of the following documents: CISPR 16-2-1:2014, CISPR 16-2-2:2010, or CISPR 16-2-3: 2016.This fifth edition cancels and replaces the fourth edition published in 2015. This edition constitutes a technical revision. Refer to the Foreword of the document for a complete listing of the technical changes from the previous edition.
Keywords: measurement of radio disturbance in the frequency range 9 kHz to 18 GHz