电工电子产品环境试验 第2部分：试验方法 试验T：锡焊
Basic environmental testing procedures for electric and electronic products-Part2:Test methods-Test T:Soldering

2005-08-26

Environmental testing procedures of electronic and electrical resistance to solvents (immersion in cleaning solvents)
电子和电气耐溶剂性的环境试验程序（浸泡在清洁溶剂中）

1995-01-01

电工电子产品环境试验设备 基本参数检定方法 低温/低气压/湿热综合顺序试验设备
Inspection methods for basic parameters of Environmental testing equipments for electric and electronic products Combined sequential cold low air pressure And damp heat testing equipments

2005-08-26

ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT; BASIC TESTING PROCEDURES AND MEASURING METHODS. GENERAL EXAMINATION, ELECTRICAL CONTINUITY AND CONTACT RESISTANCE TESTS, INSULATION TESTS AND VOLTAGE STRESS TESTS
电子设备用机电元件；基本测试程序和测量方法 一般检查、电气连续性和接触电阻测试、绝缘测试和电压应力测试

1986-03-15

电子设备用机电元件 基本试验规程及测量方法 第2部分:一般检查、电连续性和接触电阻测试、绝缘试验和电压应力试验
Electromechanical components for electronic equipment--Basic testing procedures and measuring methods--Part 2:Generalexamination，electrical continuity and contact resistance tests，insulationtests and voltage stress tests

1997-12-26

Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 1: General examination - Section 3: Test 1c - Electrical engagement length
机电元件电子设备 - 试验基地的程序和方法的测量 - 第1部分:一般检查 - 第3部分:测试1C:长电接触

1997-07-01

ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT. BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 1: GENERAL EXAMINATION. SECTION 3: TEST 1C - ELECTRICAL ENGAGEMENT LENGTH
电子设备用机电元件 基本测试程序和测量方法 第一部分:一般考试 第3节:测试1C-电气啮合长度

1999-06-28

Electrical engineering; basic environmental testing procedures; guidance to test Kc: sulphur dioxide SO<(Index)2> (high concentration) for electrical contacts and connections; indentical with IEC 68-2-49, edition 1983
电气工程；基本环境测试程序；测试Kc的指南:电触点和连接的二氧化硫SO<（指数）2>（高浓度）；与1983年版IEC 68-2-49一致

1985-08-01

Electrical ingeneering; basic environmental testing procedures; tests; guidance to test Kd: hydrogen sulphide H<(Index)2>S (high concentration) for electrical contacts and connections; identical with IEC 60068-2-46, edition 1982
电气工程；基本环境测试程序；测验；Kd测试指南:电触点和连接的硫化氢H<（指数）2>S（高浓度）；与IEC 60068-2-46 1982版相同

1985-08-01

Electromechanical Components for Electronic Equipment - Basic Testing Procedures and Measuring Methods - Part 2: General Examination, Electrical Continuity and Contact Resistance Tests, Insulation Tests and Voltage Stress Tests - GERMAN ONLY
电子设备用机电元件.基本试验程序和测量方法.第2部分:一般检查 电气连续性和接触电阻试验 绝缘试验和电压应力试验.仅限德语

1995-08-01

Electrical engineering; basic environmental testing procedures; guidance to tests Z/AFc and Z/BFc: combined temperature (cold and dry heat) and vibration (sinusoidal) tests; identical with IEC 60068-2-53, edition 1984
电气工程；基本环境测试程序；试验Z/AFc和Z/BFc指南:组合温度（冷热和干热）和振动（正弦）试验；与IEC 60068-2-53 1984年版相同

1986-10-01

Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 1: General examination; Section 3: Test 1c: Electrical engagement length (IEC 60512-1-3:1997); German version EN 60512-1-3:1997
电子设备用机电元件.基本试验程序和测量方法.第1部分:一般检验；第3节:试验1c:电气啮合长度（IEC 60512-1-3-1997）；德文版EN 60512-1-3:1997

1998-02-01