1.1 本规范涵盖了用于金属建筑屋顶和墙壁的柔性纤维玻璃隔热材料的分类、成分和物理性能。 1.2 基本绝缘毯设计为通过层压工艺进行后处理，该层压工艺应用粘合剂粘合面层。 1.3 根据本规范测量的预处理和后处理绝缘的热值仅用于绝缘，不包括空气膜表面电阻、平均温度变化或建筑物框架构件处绝缘压缩的影响，由于设计或安装技术的原因，通过紧固件的金属传导和其他平行的传热路径。 1.4 以英寸磅为单位的数值应视为标准。括号中给出的值是国际单位制的数学转换，仅供参考，不被视为标准。 1.5 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的使用者有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.6 本国际标准是根据世界贸易组织技术性贸易壁垒委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认的标准化原则制定的。

1.1 This specification covers the classification, composition, and physical properties of flexible fibrous glass insulation for use in metal building roofs and walls. 1.2 The basic insulation blanket is designed to be post-processed by a laminating process that applies an adhesive bonded facing. 1.3 The thermal values measured in accordance with this specification for both pre-processed and post-processed insulation are for the insulation only and do not include the effects of air-film surface resistance, changes in mean temperature, or compression of insulation at the framing members of the building, through metal conductance of fasteners and other parallel heat-transfer paths due to design or installation techniques. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.