首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 ASTM D4075-06(2021)
到馆提醒
收藏跟踪
购买正版
Standard Test Methods for Rubber Compounding Materials—Flame Atomic Absorption Analysis—Determination of Metals 橡胶复合材料的标准试验方法金属的火焰原子吸收分析测定
发布日期: 2021-11-01
1.1 这些试验方法包括通过火焰原子吸收法测定橡胶复合材料中的金属。 1.2 试验方法包括以下材料: 小节 氧化锌 11 – 20 1.3 以国际单位制表示的数值应视为标准值。本标准不包括其他计量单位。 1.4 本标准并非旨在解决与其使用相关的所有安全问题(如有)。本标准的用户有责任在使用前制定适当的安全、健康和环境实践,并确定监管限制的适用性。 (有关具体的警告声明,请参阅 6.1 .) 1.5 本国际标准是根据世界贸易组织技术性贸易壁垒(TBT)委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。 ====意义和用途====== 4.1 这些测试方法适用于过程控制、产品验收和研发。
1.1 These test methods cover the determination of metals in rubber compounding materials by flame atomic absorption. 1.2 The test methods include the following materials: Sections Zinc oxide 11 – 20 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. (For a specific warning statement, see 6.1 .) 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 4.1 These test methods are suitable for process control, for product acceptance, and for research and development.
分类信息
关联关系
研制信息
归口单位: D11.11
相似标准/计划/法规
现行
ASTM D5461-06(2021)
Standard Test Method for Rubber Compounding Materials—Wet Sieve Analysis of Powdered Rubber Compounding Materials
橡胶复合材料的标准试验方法粉末橡胶复合材料的湿筛分析
2021-11-01
现行
ASTM D5460-02(2021)e1
Standard Test Method for Rubber Compounding Materials—Water in Rubber Additives
橡胶复合材料的标准试验方法橡胶添加剂中的水
2021-11-01
现行
ASTM D4571-22
Standard Test Methods for Rubber Compounding Materials—Determination of Volatile Material
橡胶复合材料的标准试验方法挥发性物质的测定
2022-06-01
现行
ASTM D4315-21
Standard Test Methods for Rubber Compounding Material—Zinc Oxide
橡胶复合材料氧化锌的标准试验方法
2021-11-01
现行
ASTM D8411-21
Standard Test Method for Rubber Compounding Materials—Determination of 2-Mercaptobenzothiazole (MBT) in Rubber
橡胶复合材料的标准试验方法橡胶中2-巯基苯并噻唑(MBT)的测定
2021-10-01
现行
ASTM D4574-22
Standard Test Methods for Rubber Compounding Materials—Determination of Ash Content
橡胶复合材料的标准试验方法灰分含量的测定
2022-06-01
现行
ASTM D4569-06(2021)
Standard Test Method for Rubber Compounding Materials—Determination of Acidity in Sulfur
橡胶复合材料的标准试验方法硫中酸度的测定
2021-11-01
现行
KS M 6584(2018 Confirm)
고무 중의 금속분(납, 아연, 구리, 망가니즈) 정량방법-불꽃원자흡수분광법
橡胶的标准试验方法火焰原子吸收(AAS)分析法测定金属含量
2008-12-10
现行
KS M 6584(2023 Confirm)
고무 중의 금속분(납, 아연, 구리, 망가니즈) 정량방법-불꽃원자흡수분광법
橡胶的标准试验方法火焰原子吸收(AAS)分析法测定金属含量
2008-12-10
现行
ASTM D4004-06(2021)
Standard Test Methods for Rubber—Determination of Metal Content by Flame Atomic Absorption (AAS) Analysis
用火焰原子吸收(AAS)分析法测定橡胶中金属含量的标准试验方法
2021-11-01
现行
ASTM D5051-06(2021)e1
Standard Test Method for Rubber Compounding Materials—Benzothiazyl Disulfide (MBTS)—Assay
橡胶复合材料苯并噻唑二硫化物(MBTS)的标准试验方法.测定
2021-11-01
现行
ASTM D4934-02(2021)
Standard Test Method for Rubber Compounding Materials: 2-Benzothiazyl Sulfenamide Accelerators—Insolubles
橡胶复合材料的标准试验方法:2-苯并噻唑磺酰胺促进剂不溶物
2021-11-01
现行
ASTM D5644-23
Standard Test Method for Rubber Compounding Materials—Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber
橡胶复合材料的标准试验方法——再生硫化颗粒橡胶粒度分布的测定
2023-11-01
现行
ASTM D5376-06(2021)
Standard Test Method for Rubber Compounding Materials—Determination of the Basic Nitrogen Content in Rubber Antioxidant: Polymerized TMQ
橡胶复合材料的标准试验方法橡胶抗氧剂中碱性氮含量的测定:聚合TMQ
2021-11-01
现行
ASTM D5044-06(2021)
Standard Test Method for Rubber Compounding Materials—Free 2-Mercaptobenzothiazole (MBT) in Benzothiazyl Disulfide (MBTS)
苯并噻唑二硫化物(MBTS)中不含2-巯基苯并噻唑(MBT)的橡胶复合材料的标准试验方法
2021-11-01